0997-2-50-20-75-14-11-0

Contacts, Spring Loaded and Pressure

0997-2-50-20-75-14-11-0 is a type of contact that is used in electrical components and in mechanical applications. This type of contact is made of two different materials: one that is metallic and one that is a non-metallic material. In electrical components, the 0997-2-50-20-75-14-11-0 contact is a form of a disconnect contact. It has a shaft that is spring loaded so that the two contact surfaces can move away from each other when the shaft is activated. This is done to prevent electrical arcing or shorting out the contacts.

In mechanical applications, the 0997-2-50-20-75-14-11-0 contact is used to provide a consistent contact force. The spring loaded contact allows for the two contact surfaces to move away from each other and adjust the contact force. This is beneficial in applications that require a reliable and consistent contact force. The contact force can be adjusted depending on the application by adjusting the spring tension.

When 0997-2-50-20-75-14-11-0 contact is used in applications, they are typically mounted to a panel or housing. This allows for the contact points to be properly alignment and not move around or be pulled away from the contact surfaces. In some applications, the contact force can also be adjusted by applying pressure to the shaft of the contact. This can be done with a tool that is mounted to the contact or by using a hand lever or other device to apply pressure. This can be beneficial in applications that require a different contact force for different operating conditions.

The 0997-2-50-20-75-14-11-0 contact is an important piece of equipment in various industries. It is used in the automotive, industrial and medical industries to provide reliable and consistent contact force for a wide range of applications. It is important to make sure that the contact is properly aligned and that the contact force is adjusted according to the application before it is used. In addition, these contacts may need to be routinely inspected to ensure that they are working correctly.