09M45-06B08N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches, such as the 09M45-06B08N, constitute an important branch of electronic switching technology. They consist of two or more sets of contacts, each set selectively interlinked by a rotating actuating shaft. The number of contact sets and the switching arrangement of the switch depend on its application.The 09M45-06B08N offers six sets of contacts, arranged in two banks of three poles each, making it an ideal choice for designs requiring an economical on-off switch. It allows switching of two separate circuits or loads of up to 250V AC or 24V DC when multiple banks are combined. It is designed to be durable and reliable, with no bounce between contacts and high-temperature insulation.

The 09M45-06B08N is commonly used in applications requiring cycling up to 100-cycles per hour, such as those found in home appliances, office equipment, and various industrial installations. It is also used to control water pumps, electric tools, motors, and other relays. Additionally, because of its low cost, the 09M45-06B08N is often used as a replacement for more costly double-pole switches.

The working principle behind the 09M45-06B08N involves an inner rotor, which is linked to the outside knob. The rotor carries a set of separate contacts, which when rotated, complete the circuit by aligning the contacts with the inner and outer layer sets. The movement of the rotor is limited by stop pins located in the housing of the switch. When the switch is released, the rotor snaps back to its original position.

The 09M45-06B08N is equipped with a dielectric strength of 4500V AC and a contact bounce time of 0.25 ms. The maximum current rating is 250V AC/ 125V DC, with a maximum continuous current of 5 amps. It also features a rating of up to 10,000 cycles and a current carry capacity of up to 12A. The contact temperature rating is a maximum of 60C, while the ambient temperature range is -40C to 80C.

The 09M45-06B08N comes in a variety of end actuations and body configurations. This allows the switch to be easily adapted to a wide range of applications. It is available in both single and two-pole models, with either a continuous or intermittent on-off actuation. There are also versions with a momentary action, and versions which can be reversed or switched from one direction to the other.

In conclusion, the 09M45-06B08N rotary switch is a reliable and cost-effective solution for many electronic switching needs. Its versatile design and wide range of contact configurations make it ideal for applications where cycling up to 100-cycles per hour is required. Its robust construction and high-temperature insulation make it an ideal choice for industrial and commercial applications. Its simple working principle and low cost make it an attractive alternative to more expensive double-pole switches.

The specific data is subject to PDF, and the above content is for reference