09S60-02-1-06N-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rotary switches have a wide range of applications in areas such as instrumentation, automation and industrial control. They are mainly used to connect or disconnect electrical circuits. The rotary switch 09S60-02-1-06N-F is a 3-pole and 6-position switch with a double throw action (a.k.a throw-over switch). It is widely used in industrial control, automotive and home appliance.

The working principle of this rotary switch is as follows. When the switch is actuated, the rotor and contact assembly rotate within the stator to make and break contact connections. The flat contacts are held in place by a stator, and a flat wiper is connected to the rotor. As the rotor rotates, the wiper moves across the stator, making contact with each contact in turn. When the rotor completes the full revolution, it can open or close the corresponding circuits depending on the switch design.

The 09S60-02-1-06N-F allows for up to 6 positions, making three connections with each position. This type of rotary switch can be used for a variety of applications such as motor control, illumination control and for switching high voltage circuits. It is tolerant of high vibration and surges and can be used in critical applications. This rotary switch is easy to setup, requires minimal maintenance and is reliable.

The main features and specifications of the 09S60-02-1-06N-F are as follows. Its design is modular and flexible and it has a contact rating of 10A at 250V AC, or 15A at 125Volts AC. It operates at the frequency of 50-60Hz, with on resistance ranging from 1-50mOhms or less, and off resistance greater than 100MOhms. Its insulation resistance is greater than 100MOhms, and its dielectric strength is 1500V AC / 1 minute. It has an operating temperature range of -20 to 80 degrees C. It also has a panel cutout size of 20mm in diameter.

The 09S60-02-1-06N-F is constructed with a flame-retardant material and has a robust construction for a long lifespan. It is UL, C-UL and CQC certified and is RoHS compliant. It is also CE marked, making it suitable for use in explosion-proof applications. Additionally, the switch is IP68 rated, meaning it is dustproof and waterproof.

The 09S60-02-1-06N-F is a robust and reliable rotary switch with various applications. Its construction and features make it suitable for industrial control and automation, automotive and home appliance. It is easy to install and requires minimal maintenance. It is UL, C-UL and CQC certified, and is IP68 rated which makes it suitable for hazardous atmospheres.

The specific data is subject to PDF, and the above content is for reference