0ADEC9300-BE

0ADEC9300-BE application field and working principle

A fuse is a device that contains a coil of conductive wire, known as a fuse element. When an overload occurs or a short-circuit is detected, the fuse element will heat up and break the circuit, disconnecting the electricity supply and protecting the circuit from damage and possible fire.

The 0ADEC9300-BE fuse is a type of knife-type fast-acting fuse. It is typically used in the protection of devices such as communications systems, power supplies, control systems, electrical equipment, and other equipment.

The 0ADEC9300-BE fuse is a one-time device, so it needs to be replaced once it has operated. It is a two-pole device with a positive and negative pole, and each pole can accommodate two fuse links. The fuse body and fuse element of the 0ADEC9300-BE fuse are made of metal parts with good electrical conductivity. Fuse body is made of high-insulation plastic material with good insulation and heat resistance. The fuse element is welded with the metal part of the fuse body, inside which there are two contacts and two pin terminals.

When the current passing through the 0ADEC9300-BE fuse is higher than the set value, the fuse element will heat up under the action of Joule’s Law, and its resistance will decrease. When the temperature of the fuse element reaches a specific value, the fuse element will burn out, the current of the circuit will be interrupted, and the device will be effectively protected. After the fault is eliminated, the fuse can be replaced.