0CBF010.XP

Circuit Breakers

A Circuit Breaker is a device used to protect an electrical circuit from damage caused by overload or short circuit. The function of a circuit breaker is to detect a fault condition and automatically disconnect the circuit. In the case of an overload, the circuit breaker will sense the increased current flow and open the circuit. In the case of a short circuit, the circuit breaker will sense the decreased current flow and open the circuit.

The 0CBF010.XP Circuit Breaker is a general-purpose device that is designed to provide protection to electrical circuits by automatically disconnecting an overloaded or short-circuited circuit. The device features two separate contact sets which are capable of carrying up to 10 Amps on a continuous current basis. The device is UL 489 listed and is rated for up to 500 volts AC or DC.

The 0CBF010.XP operates by sensing an increase in current flow in the circuit and then opening or tripping the circuit breaker. The circuit breaker can be reset manually or automatically through a reset button or external switch. The device features a heat sink which helps to dissipate heat generated by the current and protects the device from damage due to excessive heat.

The 0CBF010.XP is used in a variety of applications, including residential and commercial buildings, industrial machinery, and HVAC equipment. The device is also used in electronic circuits, such as controllers and automotive wiring. In addition, the device is suitable for overload protection in high voltage power systems.

The working principle of the 0CBF010.XP is based on the accumulation of electrical charge, which is created by an overload or a short circuit. When the amount of accumulated charge reaches a certain level, the circuit is disconnected from the power source and the circuit breaker trips. The tripped circuit breaker can then be manually reset or reset remotely by sending a reset signal.

The 0CBF010.XP Circuit Breaker is a reliable and cost-effective device for protecting circuits from damage due to overload or short circuit. The device features a heat sink, two contact sets, and UL listing for up to 500 volts AC or DC. The device is used in residential and commercial buildings, industrial machinery, HVAC equipment, and other electronic circuits. The 0CBF010.XP utilizes a working principle of accumulating electrical charge and tripping the circuit breaker when the charge reaches a certain threshold.