0LEC00BJX

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuseholders are components that are used to support and hold fuses or circuit breakers. They can be either socket-type (mechanically reinforced) or terminal blocks that are directly connected to a circuit. 0LEC00BJX fuseholders are designed to be used with 10A fuses. This model can be used in a variety of circuits, such as those for power supplies, switches, motors, appliances, lighting, dimmers, and breaker boxes.

The 0LEC00BJX fuseholder is a wire-in single-phase fuseholder with a holding strength of up to 10A. It is designed to be used with a standard 10A rated fuse and has a usable temperature range of -25°C to +85°C. It has a maximum voltage rating of 300VAC, and an ambient temperature range of -30°C to +90°C. It is made from thermoplastic polyvinyl chloride (PVC) with a UL94V-0 flammability rating and a flame rating of UL 94V-2.

The 0LEC00BJX is designed with three components: the fuse terminal, the bushing, and the cover. The fuse terminal is designed to fit into a specific type of fuse, while the bushing is designed to isolate the current flow. Finally, the cover is used to protect the components from environmental elements, such as dust, dirt, and moisture. To prevent an accidental short circuit or damage to the wires, the 0LEC00BJX is designed to be heat-resistant and comes with a wire protector.

When installing the 0LEC00BJX fuseholder, the ground wire should always be connected first. This will ensure that any accidental short circuits will not cause damage to the wires. After connecting the ground wire, the remaining wires should be connected in the proper sequence. The fuse should then be carefully inserted and secured with the provided screws. The cover should be placed on top of the terminals, making sure that the cover is properly aligned with the terminals before tightening.

The 0LEC00BJX fuseholder is a reliable and efficient component that is designed with safety in mind. It is designed with a UL94V-0 flammability rating and can handle up to 10A current. It is also designed to be heat-resistant to protect against accidental short circuits. Finally, it comes with a wire protector to further ensure the safety of the wiring.

The specific data is subject to PDF, and the above content is for reference