0LKN005.S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

0LKN005.S is a type of electrical specialty fuse, one of a larger collection of these small safety components designed to protect other components from dangerous electric overloads. Electrical fuses are important, yet often overlooked components in the operation of electrical and electronic equipment, and the 0LKN005.S is no exception.

Fuses are most commonly found in household electrical systems, but can also be seen in automotive, industrial, and some specialty systems. The 0LKN005.S is a slow-blow fuse, designed to withstand a sustained overload current without immediately overloading, allowing time for the hazardous situation to be rectified. This type of fuse is often seen in equipment with motors, such as blenders, ovens, and other household appliances, protecting against sudden voltage spikes or the sudden draw of too much current.

The 0LKN005.S fuse has an operating voltage of 250 Volts and is rated at 5 Amps (5A). Its construction is quite simple, consisting of a copper or nickel wire with a thin glass or ceramic tube at one end. The glass tube is then filled with a powdered mix of metals, most commonly a mix of zinc and aluminum, known as a “fusible alloy”. The tube containing the alloy is electronically sealed at both ends, and the sealed cable connected to the fuse holder at one end.

When a current overload is detected, the heat produced by the current run through the fusible alloy causes it to melt, interrupting the flow of electricity and thus protecting the electrical components from further damage. This melting process is often referred to as the fuse “blowing” due to the noise made by the rapidly expanding vaporised fusible alloy when it suddenly melts.

In the instance were the overload is too frequent or continuous, a device known as a thermal fuse can be implemented as part of the circuit. This works by detecting the sudden rise in temperature caused by the overload, then breaking the circuit to prevent further damage. This type of device is commonly found in hairdryers, ovens, toasters, and other similar devices.

For most applications, the 0LKN005.S fuse is a fast and cost effective way to protect an electrical circuit from overload and short circuit. It\'s simple construction and low cost make it ideal for use in a wide variety of devices and systems, from small electronics to large industrial installations. It\'s reliable and long-lasting performance is another reason why it is a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference