Allicdata Part #: | 0RLC-25T050G-ND |
Manufacturer Part#: |
0RLC-25T050G |
Price: | $ 0.00 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | |
Short Description: | DC DC CONVERTER 5V 25W |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 5A ... |
DataSheet: | 0RLC-25T050G Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | 0RLC-25T |
Packaging: | Tray |
Part Status: | Obsolete |
Type: | Isolated Module |
Number of Outputs: | 1 |
Voltage - Input (Min): | 36V |
Voltage - Input (Max): | 72V |
Voltage - Output 1: | 5V |
Voltage - Output 2: | -- |
Voltage - Output 3: | -- |
Current - Output (Max): | 5A |
Power (Watts): | 25W |
Voltage - Isolation: | 1.5kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OTP, OVP, SCP, UVLO |
Operating Temperature: | -40°C ~ 85°C |
Efficiency: | 90% |
Mounting Type: | Through Hole |
Package / Case: | 6-DIP Module |
Size / Dimension: | 2.00" L x 1.00" W x 0.44" H (50.8mm x 25.4mm x 11.2mm) |
Control Features: | Enable, Active High |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC/DC converters are widely used in many electronic products, such as laptops, mobile phones, and tablets. These converters provide power to those devices, and they range from very small and simple to very large and complicated. The RLC-25T050G is a DC/DC converter with a wide range of applications. This article will discuss the application field and working principle of the RLC-25T050G.
The RLC-25T050G is a low-power DC/DC converter and is a highly efficient power converter with an output voltage of 8-25V and an input voltage of 8-36V. It is designed for a range of applications, such as mobile, automotive, automotive-zone, and industrial control systems. This converter is also suitable for most IGBTs, FIDETs, and power MOSFETs.
It features a wide input voltage range, up to 100V, and a maximum output current of 50A. This converter can also be used with a wide range of inductors. With its high efficiency and low power consumption, it is ideal for applications in which space and power are limited. It is also highly reliable, with a ripple noise of less than 20mVp-p, and a very low output voltage deviation of 1%.
The RLC-25T050G has a working principle that is essentially the same as that of other DC/DC converters. The input voltage is rectified using rectifying diodes and then a filter capacitor is used to convert the ripple voltage into a smooth DC voltage. This voltage is then fed into a transformer or an inductor to convert the input AC voltage into an AC voltage with a higher or lower voltage, depending on the turns ratio of the transformer or inductor.
The voltage is then rectified again and filtered using a capacitor to obtain a DC voltage. The output voltage is controlled by using an integrated circuit, which is connected to the output voltage to regulate the output voltage. The output voltage can be adjusted by adjusting the resistors in the circuit or by using a PWM signal to pulse the output voltage. The output voltage is also protected from overloads using a fuse.
The RLC-25T050G can also be used as a switching regulator. In this mode, the output voltage is regulated by the switching of an integrated circuit. The switching is done at a specific frequency, and the duty cycle is adjusted to regulate the output voltage. This type of system is typically used in applications where the output voltage needs to be more accurately regulated.
The RLC-25T050G is a highly efficient DC/DC converter that is suitable for a wide range of applications. It features a wide input voltage range, up to 100V, and a maximum output current of 50A. It is designed for a range of applications, such as mobile, automotive, automotive-zone, and industrial control systems. Its high efficiency and low power consumption make it ideal for many applications. Its working principle is based on rectification and filtering of the input voltage, followed by regulation of the output voltage through an integrated circuit, or by using a switching regulator.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
0RLC-10T033G | 0.0 $ | 1000 | DC DC CONVERTER 3.3V 6WIs... | |
0RLC-10T050G | 0.0 $ | 1000 | DC DC CONVERTER 5V 10WIso... | |
0RLC-10T120G | 0.0 $ | 1000 | DC DC CONVERTER 12V 12WIs... | |
0RLC-10T240G | 0.0 $ | 1000 | DC DC CONVERTER 24V 12WIs... | |
0RLC-25T033G | 0.0 $ | 1000 | DC DC CONVERTER 3.3V 23WI... | |
0RLC-25T050G | 0.0 $ | 1000 | DC DC CONVERTER 5V 25WIso... | |
0RLC-25T120G | 0.0 $ | 1000 | DC DC CONVERTER 12V 30WIs... | |
0RLC-25T12LG | 0.0 $ | 1000 | DC DC CONVERTER 12V 30WIs... | |
0RLC-25T150G | 0.0 $ | 1000 | DC DC CONVERTER 15V 30WIs... | |
0RLC-25T240G | 0.0 $ | 1000 | DC DC CONVERTER 24V 30WIs... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...