0SLC006.T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Electrical Specialty Fuses have been around since the early days of electronics. ZSLC006.T are one type of specialty fuses with a specific application field and working principle.

Typically, an electrical fuse consists of a conductive metal strip or wire that is wound around a nonconductive material, such as ceramic or glass, and is then secured to the desired area. This metal strip melts when too much current passes through it, allowing the inrush of current to be safely dissipated. A ZSLC006.T fuse is specifically designed with an application to provide overload and short-circuit protection in 100-volt AC circuits, and to reduce the chances of fire or other damage due to the electrical condition.

The working principle of a ZSLC006.T fuse is as follows. When an overload or short-circuit occurs, a high current will flow through the fuse causing it to heat up and eventually melt the metal strip. This interrupts the current flow, preventing further damage to the electrical system. The ZSLC006.T fuse is designed to melt quickly enough to inhibit an overload or short-circuit to a safe stop. When a fuse has been tripped, it needs to be replaced in order to consistently provide overload and short-circuit protection.

The ZSLC006.T fuse is designed for use in 100-volt AC circuits such as those found in industrial control circuits, motors, lighting fixtures, and other applications that require overload and short-circuit protection. It has a nominal voltage rating of 100 volts AC and a current rating of 6 amps. Additionally, it features a time delay of 3 seconds at 300 percent of rated current.

The ZSLC006.T fuse is designed to meet key safety requirements. It is UL listed and CSA certified and it is manufactured using high-quality materials. It can be easily installed into standard fuse holders and requires minimal maintenance.

The ZSLC006.T fuse is a reliable and cost-effective solution for applications that require overload and short-circuit protection in 100-volt AC circuits. It is designed to quickly disconnect the circuit in the event of an overload or short-circuit, thus preventing further damage to the system. It is UL listed and CSA certified and can be easily installed into fuse holders with minimal maintenance.

The specific data is subject to PDF, and the above content is for reference