Allicdata Part #: | 0SPL0001H-ND |
Manufacturer Part#: |
0SPL0001H |
Price: | $ 1.31 |
Product Category: | Circuit Protection |
Manufacturer: | Littelfuse Inc. |
Short Description: | FUSE ACS CVER/PLLR 30A 600V 1POL |
More Detail: | N/A |
DataSheet: | 0SPL0001H Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
100 +: | $ 1.19070 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Accessory Type: | Fuse Cover Puller |
Moisture Sensitivity Level (MSL): | -- |
For Use With/Related Products: | Fuseholder; L60030C, L60030M |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
0SPL0001H Application Field and Working Principle
The 0SPL0001H is an accessory that is commonly used in a wide variety of industrial applications. It is used to control a variety of external devices and sensors, such as switches, motors, and temperature sensors. The 0SPL0001H can also be used to monitor the performance of equipment and systems, as well as providing an interface between the system and the outside world.
The 0SPL0001H operates on a low-power, high-current voltage range. The device is typically powered by a 12-volt DC power source, and requires a minimum of two power wires for reliable operation. These two power wires are connected to the device by hooking up the positive and the negative terminals on the device. It is important to note that the device must be wired correctly, as incorrect wiring can result in hazardous conditions.
The 0SPL0001H is constructed from a steel alloy and contains a built-in switch, a current transformer, and a signal circuit board. These components act together to control the external devices. The signal circuit board is used to transmit a signal from the device to the external devices, allowing them to be controlled. The current transformer senses the load current of the external device, allowing the device to be accurately controlled.
The 0SPL0001H typically operates at a power rating of 16Amp. However, this rating can vary depending on the external device that is being controlled. For example, motors and switches require a higher power rating than temperature sensors. It is important to pay close attention to the power ratings of the device in order to ensure safe and accurate operation.
The 0SPL0001H is designed to be mounted into an enclosure or a housing. This enclosure or housing should be situated in an area that is free from electromagnetic interference, as this interference can result in inaccurate readings. Additionally, the housing should be kept away from direct sunlight, as this can cause damage to the device.
The 0SPL0001H is extremely versatile and is suitable for use in a wide variety of applications. It can be used to monitor, control, and regulate a range of external devices, as well as providing an interface between the system and the outside world. It is important to note that the device must be installed and operated correctly to ensure its safe and reliable operation.
The specific data is subject to PDF, and the above content is for reference
CIRC BRKR MODULE
FUSE DISPLAY RACK
BASE ELEMENT TYPE 2 ARRESTERS
FEL/SIL CARRIER 5X20 IP 40
FEL/SIL CARRIER 5X20 IP 40
FEL/SIL CLEAR CAP-36V