0TLS015.TXL

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 0TLS015.TXL is a specialized fuse commonly used in the electrical engineering fields. It is designed to protect electrical circuits from overcurrents, short circuits, and other potentially dangerous conditions. This fuse is usually used in industrial, medical, and telecommunications applications.

The 0TLS015.TXL is a timed-delay type fuse. This means that it does not immediately blow when an overcurrent condition is present, but instead allows the current to continue for a predetermined amount of time to allow for the circuit to safely shut down. The fuse is designed with a response time of 15 seconds, hence the 0TLS015 label.

The 0TLS015.TXL has a limiting current of 0.32 Amps (320 milliAmps) and a voltage rating of 24VDC or 125VAC. It is usually available in single-pole or dual-pole configurations with either a straight-blade or pluggable design. The fuse also features a dual-action design, meaning that it trips open on both overcurrent and reverse polarity conditions.

The circuit protection provided by the 0TLS015.TXL is accomplished through the use of a special type of wire, known as a wire filling. This wire is wrapped around the inside of the fuse and connected across the terminals. When an overcurrent condition occurs, the heat generated by the resistance of the wire causes it to expand, which results in an increase in the fuse’s resistance. The increased resistance dissipates the heat and prevents the current from passing through the fuse.

The 0TLS015.TXL is designed for use in power supplies, motor circuits, and other applications that require reliable circuit protection. It is designed to provide overcurrent protection while still allowing the circuit to safely shut down in the event of a fault. The fuse is available from a variety of suppliers and can be supplied in bulk or individually for specific requirements.

In conclusion, the 0TLS015.TXL fuse is an important component of electrical engineering, providing essential overcurrent protection in multiple applications. It is easy to install and requires minimal maintenance, making it a cost-effective way to safeguard circuits from overcurrents, short circuits, and other potentially dangerous conditions.

The specific data is subject to PDF, and the above content is for reference