0ZCA0100FF2E Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PTC Resettable Fuses are widely used in the industrial applications, where the automated resetting mechanism has to be in place. The 0ZCA0100FF2E is one such example of such a type of resettable fuse.

The 0ZCA0100FF2E resettable fuse is a self-regulating current-limiting device that typically consists of an outer case, insulating material, metal conductive element, and a resetting mechanism. This resettable fuse is designed to allow maximum current passage until it reaches its rated current-based on the device’s requirement. Once it reaches its maximum current, it will then automatically switch off the current flow until it is manually reset.

The 0ZCA0100FF2E applies the same principles of the traditional PTC (posistor) fuses. These fuses use a ceramic material, such as one with an enhanced zinc oxide composition, as the semiconductor material that limits the current delivered to the point of overload. This material is designed to heat up at a rate much slower than ordinary plastics, thus it regulates the current delivered and temporarily interrupts the flow until it is reset. The 0ZCA0100FF2E contains an integrated circuit with a thermal sensing element that actively monitors the temperature of the material. It will then act to reset the current at a predetermined temperature or at a manual reset.

There are several uses of the 0ZCA0100FF2E resettable fuse in a variety of industrial applications. The most common use is in over-current protection circuits. This resettable device is employed in these circuits to protect the entire system against an overload that can cause permanent damage to the equipment or components. It is especially useful in applications such as electrical devices, home appliances, automotive and aircraft, and other industrial applications where the power supply must be shut off in case of an overload.

The 0ZCA0100FF2E is also regularly used in the protection of hazardous voltages, such as high voltage or other low voltage supplies. This type of resettable fuse can be used to provide an additional layer of protection in these areas. This type of circuit also requires an additional electrical device, such as a motor contactor, to control the cutoff voltage when the fuse trips.

In addition to safety-related applications, the 0ZCA0100FF2E resettable fuse can also be used in the design of various electronic devices. In this case, the device is meant to provide power management and conserve energy by regulating power use. This type of device can be integrated into the electronic circuit as a protection feature in case the voltage increase or decrease beyond its rated value.

The 0ZCA0100FF2E resettable fuse is a versatile device with many different uses. Its self-regulating mechanism, along with its resetting ability, makes it a reliable and safe choice for many industrial applications.

The specific data is subject to PDF, and the above content is for reference