0ZCG0200FF2C Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PTC Resettable Fuses are often used in a wide variety of applications, due to their ability to automatically reset after being tripped. The 0ZCG0200FF2C is a PTC Resettable Fuse that is commonly used for fast and efficient protection against short-circuiting.

The 0ZCG0200FF2C is designed to be mounted on a DIN-rail or panel-mounted in place of a traditional fuse. The device is able to protect against short circuits when the current exceeds two times the rated current of the part, thus providing an extra layer of protection. The 0ZCG0200FF2C will also reset automatically when the fault is removed, meaning that the process does not have to be restarted manually to restore power. This makes it an ideal solution for applications where frequent overcurrent faults may occur.

In terms of its working principle, the 0ZCG0200FF2C is comprised of two elements: a limiting resistor and a semiconductor component. When the current passes through the PTC Resettable Fuse, it passes through the limiting resistor, which reduces the current and dissipates it as heat. The heat generated by the limiting resistor is then used to trigger the semiconductor component, which causes an increase in resistance. This increase in resistance limits the current to a safe level, protecting the circuit from possible damage. When the fault is removed, the semiconductor component will cool down and the resistance will decrease, allowing the current to flow normally through the fuse.

The 0ZCG0200FF2C is suitable for a range of applications, from industrial machinery to consumer electronics. It is suitable for use in circuits where the normal current draw is up to 10A and the maximum operating conditions are within the device\'s acceptable range. It can be used in single- or three-phase applications, and it has a maximum voltage rating of 400V. This makes it a suitable choice for a wide range of applications.

The 0ZCG0200FF2C is an ideal solution for protecting circuits from short circuits and overcurrent faults. Its simple and efficient design makes it easy to install, and its ability to automatically reset after being tripped ensures that the system can be brought back online quickly if a fault occurs. This makes it an ideal choice for a variety of applications where reliable protection is needed.

The specific data is subject to PDF, and the above content is for reference