1-1393305-1

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Power relays are important components in electrical systems that allow the control of an electrical output with an electrical input signal. The product number 1-1393305-1 is a two pole, normally open power relay, with a rated current of over 2 Amps and a voltage rating of 250 VAC or 28VDC. It can be used for a variety of application fields and will be discussed in this article along with its working principle.

Application Field

The 1-1393305-1 conductive non-snap relay can be used in industrial, domestic and motor-management applications. Its features and settings allow it to provide solutions for battery isolation, circuit protection, fan control, furnace control, grounded applications, motion control, overload control, solid-state switch control, and alarms. It is also suitable for applications that require load switch on peaks or intermittent operation.When used for battery isolation, the relay is wired to switch between two batteries and isolate each battery from the other one. The isolating relay will disconnect the battery when the voltage drops in order to prevent over-discharging, or when the charge exceeds a predetermined level.When used in circuit protection, the 1-1393305-1 power relay is primarily used to prevent overloads caused by over-currents. If an over-voltage condition occurs, the relay can automatically disconnect the circuit.When used for fan or furnace control, the relay is designed to switch on and off automatically depending on the temperature of the fan or furnace. The relay can also be used for motion control applications as it can detect motion and then start or stop the motor. The relay can also be used for overload control and switch control to protect against a power overload.

Working Principle

The 1-1393305-1 power relay works with a coil that has an electrical current running through it. When the input voltage that is applied to the coil reaches a certain point, the relay\'s switch will be triggered. This action is called an electromechanical effect, where the voltage applied to the coil causes a mechanical movement in the switch, which triggers the relay.When the switch is triggered, the contacts of the switch close and the connection between the two terminals of the device is made. This connection supplies power to the output of the relay which then turns a device on or off. When the switch is turned off, the contacts are open and no power is supplied to the output.The 1-1393305-1 is designed to withstand high voltages and currents, while able to switch on and off quickly. It can also be used as a safety mechanism, as it can be triggered when a voltage or current set point is reached or exceeded.

Conclusion

The 1-1393305-1 power relay is a two pole, normally open two pole power relay that is rated for up to 2 Amps and can be used in a variety of application fields. It can be used for battery isolation, circuit protection, fan control, furnace control, grounded applications, motion control, overload control, switch control, and alarms. It works by running an electrical current through a coil that triggers a switch when a voltage set point is reached. This switch then closes and supplies power to the output of the relay, turning a device on or off.

The specific data is subject to PDF, and the above content is for reference