G5Q-1A-EU DC12

Due to market price fluctuations,if you need to purchase or consult the price.You can contact us or emial to us:   sales@allicdata.com

1. Feature

    1. Excellent switching performance for various loads.

    2. Small size, but provides 8-kV impulse withstand voltage (between coils and contact information).

    3. Low coil power consumption (SPST-NO: 200 mW, SPDT: 400 mW)

    4. Coil Insulation System: Class F (UL1446)

    5. Complies with IEC/EN 60335-1. (-HA model)

    6. Reduced power consumption through voltage hold and pulse width Modulation (PWM) Control (G5Q-@-PW Models Only)

2. Precaution

    1. The coil voltage drops after the relay operates (holding voltage)

        - If the coil voltage drops to the holding voltage after the relay operates, first apply the rated voltage to the coil for at least 100 ms as shown in the figure below.

        - At least 40% (G5Q-1A model)/30% (G5Q-1 model) voltage The coil holding voltage requires the rated voltage. 

        - Don't let voltage fluctuations cause the coil to hold the voltage below this level.

    2. Reduce the power consumption of the coil by pulse width modulation (PWM)

        - Models with PWM drive capability (-PW) can reduce coil holding current through PWM control. 

        - This feature reduces power consumption by reducing the current held by the coil.

        - Apply the rated voltage for at least 100 ms while the relay is operating.

        - Below are our verification criteria. When using, should Be sure to check the actual machine under actual usage conditions.

3. Verification conditions performed by OMRON

    1. Applied voltage: rated voltage

    2. Duty cycle: 50% or more

    3. Frequency: 10 kHz or higher

    4. Diode Vf: 0.4 V or less