1-1546734-2

Top Termination:	Screws with Captive Plate
Material Flammability Rating:	UL94 V-0
Material - Insulation:	Polyamide (PA), Nylon
Operating Temperature:	105°C
Mounting Type:	Through Hole
Terminal Screw Finish:	Zinc, Clear Chromate
Terminal Screw Material:	Steel
Color:	Black
Features:	--
Barrier Type:	2 Wall (Dual)
Bottom Termination:	PC Pin
Series:	Buchanan
Wire Gauge:	12-22 AWG
Voltage Rating:	300V
Current Rating:	20A
Number of Rows:	1
Pitch:	0.325" (8.26mm)
Number of Wire Entries:	12
Number of Circuits:	12
Terminal Block Type:	Barrier Block
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<Category>Terminal Blocks - Barrier Blocks</Category>Terminal blocks, commonly known as barrier blocks, are widely used in the transmission, distribution and control of various energy sources. These blocks provide a safe, efficient, and reliable way of connecting electrical power and signals in various control applications.The 1-1546734-2 terminal block is a type of device that is used in applications where two or more signals need to be connected. It consists of a body or base, which is usually made of metal or plastic, and two terminals, which are made of copper or brass. The body or base has a number of internal parts such as screws, washers and terminal plates. The terminals are connected to each other by means of metal rivets or screws. The main purpose of a terminal block is to provide a secure mechanical connection between the two signal lines.The 1-1546734-2 terminal block has several advantages over traditional cables and wires. Firstly, it is much easier to install and to maintain since the terminals can be easily removed or replaced. Secondly, it is more reliable than cables and wires, since there is less chance of short-circuiting or ground-looping. Finally, it can carry multiple signals simultaneously, thus reducing the need for extra cables and wires.The 1-1546734-2 terminal block is usually installed in a panel box or switchgear. The device is connected between two pairs of electrical circuits, usually between a power supply and a load. The device is composed of several components, such as a terminal plate, which provides a way to connect the two circuits, and a barrier plate, which prevents the current from being unintentionally short-circuited or bridged across the terminals.Once the terminal block is installed, the terminals can be soldered or connected by means of clamps. This allows the two circuits to be connected in an easy and reliable manner. The connection procedure should be carried out carefully, as incorrect soldering or connection of the terminal blocks may result in short-circuiting of the circuits. This could potentially cause serious damage or even lead to a fire. Therefore, it is important to follow the manufacturer’s instructions for proper installation and connection of the device.The 1-1546734-2 terminal block is used in many applications, including power, control, instrumentation, spark gaps and surge protection. It can also be used in communication, process control and process instrumentation, as well as many other industrial applications.Terminal blocks provide a variety of advantages, including reduced time and cost of installation, improved reliability, and a secure connection between two circuits. Furthermore, the device helps to create a safe environment for electrical components, and is essential for any efficient system design. As such, this terminal block is an essential component in any electrical system, and is widely used in many industries.

The specific data is subject to PDF, and the above content is for reference