1-1623866-5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer potentiometers are widely used in all areas of electrical and electronic engineering and consist of an adjustable element, usually a resistor, equipped with a sliding contact and/or a rotating spindle-like a screwdriver. They are therefore commonly known as trimmers or trimmer potentiometers. The 1-1623866-5 is a particular type of trimmer potentiometer that has a wide variety of applications and works behind the scenes in many household and industrial applications.

The 1-1623866-5 is a miniature three-terminal trimming potentiometer. Eliminates the need for four-terminal precision potentiometers, offering the same performance as higher-cost adjusters. It is a single turn cermet trimmer that offers high reliability and accuracy. It is a type of trimming potentiometer that allows precise adjustment of an electrical circuit. Its main purpose is to enable resistors to be adjusted for the precise amount of resistance required for the application. The 1-1623866-5 is offered in a variety of resistance values, power ratings, and physical sizes.

The 1-1623866-5 works by using its three terminals. The first terminal acts as an input connection which is connected to a voltage source. The second terminal acts as an output connection which is connected to the load. The third terminal is the wiper terminal, and this is connected to the resistance element. By turning the adjusting screw located on the top of the potentiometer, the wiper is moved along the resistance element, increasing or decreasing the resistance between the input and output terminals. The adjustment range of the 1-1623866-5 is typically from 0 to 10,000 Ohms.

The 1-1623866-5 has applications in all areas of electrical and electronic engineering, including consumer electronic products, signal control circuits, volume and tone control circuits, audio amplifiers, motor speed controllers, temperature controllers, various measuring and monitoring circuits, sensors, and many more. They can also be used in analog applications such as potentiometers and linear controls.

The 1-1623866-5 is an ideal choice for applications where the adjustment range is low, such as volume, brightness or tone controls, as the range of adjustment is small. It is also suitable for high-accuracy adjustments, as it provides precise adjustment of the resistance element. The 1-1623866-5 is usually mounted in a printed circuit board, but can be surface mounted or soldered onto wire leads depending on the application and requirements.

The 1-1623866-5 is a highly reliable and accurate trimming potentiometer, making it suitable for both industrial and consumer applications. It is especially suitable for applications that require precise adjustment of the resistance element. The 1-1623866-5 is durable and easy to install, making it an ideal choice for a wide variety of electrical and electronic engineering applications.

The specific data is subject to PDF, and the above content is for reference