1-1676906-5 Allicdata Electronics
Allicdata Part #:

1-1676906-5-ND

Manufacturer Part#:

1-1676906-5

Price: $ 0.00
Product Category:

Capacitors

Manufacturer: TE Connectivity Passive Product
Short Description: CAP TANT 22UF 4V 20% 0805
More Detail: 22µF Molded Tantalum Capacitors 4V 0805 (2012 Metr...
DataSheet: 1-1676906-5 datasheet1-1676906-5 Datasheet/PDF
Quantity: 1000
Lead Free Status / RoHS Status: Lead free / RoHS Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: TYTP
Packaging: Tape & Reel (TR) 
Lead Free Status / RoHS Status: --
Part Status: Obsolete
Moisture Sensitivity Level (MSL): --
Capacitance: 22µF
Tolerance: ±20%
Voltage - Rated: 4V
Type: Molded
ESR (Equivalent Series Resistance): --
Operating Temperature: -55°C ~ 125°C
Lifetime @ Temp.: --
Mounting Type: Surface Mount
Package / Case: 0805 (2012 Metric)
Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
Height - Seated (Max): 0.055" (1.40mm)
Lead Spacing: --
Manufacturer Size Code: P
Features: General Purpose
Failure Rate: --
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum capacitors are widely used daily in many modern electronic devices. Their low cost and high capacitance make them a popular choice for both consumer devices and industrial applications. The 1-1676906-5 tantalum capacitor is a type of capacitor that is used for various applications, and its working principle is based on the properties of the tantalum element.

Forms & Configurations of the 1-1676906-5

The 1-1676906-5 capacitor is constructed from two steel plates that are separated by a layer of tantalum metal. The two steel plates are connected to the capacitor\'s terminals, and the tantalum layer acts as a dielectric material. The configuration of the capacitor is determined by the formation of the plates and the type of dielectric material used. The two most common configurations for the 1-1676906-5 are the axial and the radial.

The axial type is a cylindrical and elongated structure, with the two terminals protruding from opposite ends. The terminals of an axial capacitor are usually connected to wires that in turn are connected to the device\'s circuit board. The radial type, on the other hand, is much shorter in length and typically features an arc-shaped configuration. Its terminals are installed perpendicularly to the capacitor\'s axle and should be separately connected to the device\'s circuit board.

Application Fields & Uses

The 1-1676906-5 capacitor is widely used in a variety of electronic devices thanks to its unique properties. It is most commonly found in power supplies, audio amplifiers, oscillators, and computers. It is also used in commercial and military applications, such as radar systems, GPS devices, and other electronics.

In power supplies, its high capacitance and low cost make it an ideal choice for filtering out spikes and other undesirable signals. Its small size and light weight also make it a popular choice in aerospace applications, where its low weight is essential to saving on fuel costs. The 1-1676906-5 is also used in audio amplifiers due to its high capacitance, which is needed for minimizing high frequency noise.

Working Principle

The 1-1676906-5 tantalum capacitor is able to store an electric charge due to its unique construction. The two steel plates separated by the dielectric material act as two capacitors that are connected in series. This forms what is known as a "polarized capacitor" which can only store electric charges in one direction, and is therefore not suitable for alternating current applications.

When a voltage is applied to the capacitor, the steel plates attract positive and negative charges to their respective sides. These charges are trapped within the dielectric layer, and the higher the capacitance, the greater the amount of charge that can be stored. The capacitance of the 1-1676906-5 is dependent on its size and the dielectric material used.

Conclusion

The 1-1676906-5 is a type of tantalum capacitor that is used in a variety of electronic applications, and is well-known for its high capacitance and low cost. It is mostly used for power supplies, audio equipment, oscillators and aerospace applications. Its working principle is based on attracting opposite charges to its two steel plates that are separated by a dielectric layer. This forms a polarized capacitor that is excellent for storing electric charges.

The specific data is subject to PDF, and the above content is for reference

Latest Products
TAJP685K010R

CAP TANT 6.8UF 10V 10% 08056.8F Molded T...

TAJP685K010R Allicdata Electronics
T491B475K016ATAUTO

CAP TANT 4.70UF 16.0V4.7F Molded Tantalu...

T491B475K016ATAUTO Allicdata Electronics
T86C475M035EBSS

CAP TANT 4.7UF 35V 20% 23124.7F Molded T...

T86C475M035EBSS Allicdata Electronics
1-1879065-6

CAP TANT 33UF 10V 20% 291733F Molded Tan...

1-1879065-6 Allicdata Electronics
TIM225K035P0W

CAP TANT 2.2UF 35V 10% RADIAL2.2F Molded...

TIM225K035P0W Allicdata Electronics
ECS-T0JD227R

CAP TANT 220UF 6.3V 20% 2917220F Molded ...

ECS-T0JD227R Allicdata Electronics