Allicdata Part #: | 1-533082-0-ND |
Manufacturer Part#: |
1-533082-0 |
Price: | $ 2.78 |
Product Category: | Connectors, Interconnects |
Manufacturer: | TE Connectivity AMP Connectors |
Short Description: | CONN PIN HDI UNPLATED |
More Detail: | Contact Power Pin Screw Mount |
DataSheet: | 1-533082-0 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2000 +: | $ 2.52888 |
Series: | HDI (High Density Interconnect) |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Type: | Power |
Pin or Socket: | Pin |
Contact Termination: | Screw Mount |
Wire Gauge: | -- |
Contact Finish: | -- |
Contact Finish Thickness: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Backplane Connectors - Contacts
The 1-533082-0 backplane connector fits into many applications and is an efficient way to reliably connect two or more devices. This device, commonly used in high-speed and power applications, combines signals, grounds, and power with high-density packaging into a single connector. In this article, we\'ll explore the 1-533082-0 backplane connector in greater detail, including: application field, contact configurations, and working principle.
Application Field
The 1-533082-0 backplane connector is suitable for a wide variety of applications, including but not limited to: PCs, servers, storage devices, aerospace/military, medical, consumer electronics, communications, industrial electronics, and test & measurement equipment. It is typically used when tall and narrow printed circuit boards are being connected. As it is designed to handle high-speed and power applications, the 1-533082-0 connector is often used in high-end equipment where reliability is essential.
Contact Configurations
The 1-533082-0 backplane connector is a single unit that offers four rows of high-density contacts in row spacing of 2.00mm apart on a 0.50mm pitch. It also features three levels of electrical connectivity, through four contact rows (connector B), seven contact rows (connector Bd) and nine contact rows (connector A). Its contacts place ground and signal layers of a printed circuit side-by-side with power layers, which enables power and high-speed data to be transmitted in one unit.
Working Principle
The 1-533082-0 backplane connector works when two sides of a board are to be connected. At the downstream side, the contact arrays are pressed into the board through an actuator. During operation, this device allows power, ground, and signal lines to be sent from the upstream process to the downstream process using contact arrays. Depending on the application, contacts are made with lugs and pins on the board.
The 1-533082-0 backplane connector is a highly reliable solution for making connections between two boards. It enables power, ground, and signal lines to be sent quickly and easily, and with its high-density contact configuration, it can support a wide range of applications. When making connections, this device provides a secure, direct connection between different boards.
The specific data is subject to PDF, and the above content is for reference
CONN CONTACT FOR 8483/8484 PLUGSContact ...
DIN-POWER CRIMP 3 M PL1 2500 RContact S...
RAPID LOCK 12MM 95MM BLUEContact Silver ...
TYPE M CONT CRIMP 30AUContact Gold Power...
CONNECTOR - PRINTED CIRCUITContact Gold ...
CONN CONTACT DIN SOCKETContact Gold Powe...