1.63521.0031500

Panel Indicators, such as the 1.63521.0031500, are seen in many automation control systems. Component Indicators provide a visual method for monitoring and controlling process values, parameters, and indicators. The 1.63521.0031500 is a type of Pilot Light, a component indicator device used in complex automated systems to provide a visual indication of a given system process.

The 1.63521.0031500 Pilot Light uses a single contact to provide the electrical signal of a process being in one state or another. This single contact closure is interpreted by the Pilot Light, and that interpretation is then presented in a visual format when the device is activated.The visual format can be a combination of green, yellow, and/or red illumination that represents the logic state of the process being monitored.

The 1.63521.0031500 Pilot Light is typically wired to a normally open contact, such as from a limit switch, float switch, or push button switch. The contact closes when the process is in an activated state, which causes the Pilot Light to illuminate. Similarly, the contact opening results in the Pilot Light turning off. This type of diode indicator is often used in automated process systems when a visual indication is required as to the activated or deactivated state of a system, process, or parameter being monitored.

The versatile design of the 1.63521.0031500 Pilot Light makes them suitable for use in a variety of applications, such as: manufacturing assembly lines, control panels, test stand setup, and other process monitoring systems. In addition to their utility in automated process monitoring systems, they are also commonly used in non-automated applications/venues such as interactive kiosks, game/amusement centers, ticket check-in systems, and video arcade and console gaming systems.

The 1.63521.0031500 Pilot Light is commonly used as an integral component of states or change-over systems. The Pilot Light is typically integrated with a relay, timer, or control-type system. The Pilot Light can then provide a constant visual indication of the relay\'s state. The Pilot Light can either remain constantly lit or in an "alternating flash" mode that indicates a process is in an active or inactive position.

The 1.63521.0031500 Pilot Light components are available in various form factors, including round, square, and rectangular. Different types of illumination (including red, green, yellow, and blue) are available depending on the application needs. The contact type for the Pilot Light can be varied to accommodate a wide range of available input sources, such as a coil, limit, float, or toggle switch.

The 1.63521.0031500 Pilot Light includes a two-piece case construction with an easily replaceable lamp assembly. The lens is typically made of a colored, optically clear plastic material to maximize the beam of light. The lens also includes a molded-in mounting hole for secure mounting onto a variety of substrates. Two terminal screws are also included to facilitate electrical connection.

The working principle of the 1.63521.0031500 Pilot Light is simple: when the contact is closed, the device will illuminate. If the contact is open, the device will not illuminate. The Pilot Light will remain constantly illuminated in a “steady on” mode, or it can be switched to an “alternating flash” mode. The alternating flash mode is typically used when the process needs to indicate an active or inactive state.

In conclusion, the 1.63521.0031500 Pilot Light is a versatile, reliable, and cost-effective solution for a diverse range of applications. It provides a simple and accurate means of visually displaying system parameters, warnings, and system status. The 1.63521.0031500 can be used in many automation control systems, such as manufacturing assembly lines, control panels, and test stand setups. With its robust design and reliable functionality, the 1.63521.0031500 Pilot Light is an ideal solution for visual process indication.