100651-2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Quick Connects, Quick Disconnect Connectors, also known as 100651-2, are a type of electrical connector that enables a rapid, positive connection and disconnection from a power source with minimal effort. These connectors are ideally suited to applications where frequent and rapid connections and disconnections are required, such as in automotive applications, marine applications, and industrial applications. The primary benefit of using these connectors is that they allow quick plug and play installation, making them ideal for applications requiring frequent reconfiguration.

Each connector consists of two components, a male and female connectors, which are designed to mate with each other. The male connector is typically designed with a rounded end and a slightly protruding projection. On the female end, the connection is made in the same manner as a typical electrical connection. The male and female connectors will typically be slightly spaced apart from each other, allowing the connection to be made without any further additional effort.

The connectors are typically made from high-grade plastic or metal, depending on the application they are to be used for. Plastic connectors are usually used for their lightweight properties and cost savings, while metal connectors may be more suitable for use in more extreme environments. Additionally, some connectors are designed to provide additional electrical and environmental protection, such as dust and water resistance.

In order for the 100651-2 connectors to form a reliable connection, the metal contact pins on the male and female connectors must be kept clean and free from corrosion. To ensure a good connection, cleaning kits can be purchased that can quickly remove any dirt and debris from the connection points. Additionally, when connecting and disconnecting the connectors, they should always be handled carefully, as physical force can cause the connectors to become damaged.

When making an electrical connection with the 100651-2 connectors, the process is relatively straightforward. First, the male and female connectors should be properly mated together, making sure the pins are properly aligned. Then, the appropriate amount of torque should be applied to the connectors, to ensure a good connection. After the connectors are tightened, the connection is complete and the power source can now be turned on.

The 100651-2 connectors provide a great solution for applications requiring quick connections and disconnections. The connectors are relatively inexpensive, easy to use, and provide a reliable connection for any application. Furthermore, the connectors are designed to provide a safe and reliable connection, making them suitable for use in a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference