100C22X58AM/I

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are an important part of electrical safety systems used in a wide variety of applications ranging from consumer electronics to complex industrial systems. The 100C22X58AM/I fuse is a specialty fuse that is designed for use in particular applications. In this article, we will discuss the application field and working principle of the 100C22X58AM/I fuse.

Applications of the 100C22X58AM/I Fuse

The 100C22X58AM/I fuse is designed for use in both outdoor and indoor applications and is UL recognized and CSA certified to UL 248-14. It is suitable for use in general purpose industrial circuits where low voltage and ample current is needed, such as wind turbines, photovoltaic systems, lighting fixtures, motor controllers, and other industrial systems. It is also ideal for use in safety circuits such as emergency lighting systems and fire alarm systems.

Working Principle of the 100C22X58AM/I Fuse

The 100C22X58AM/I fuse uses an internal strip of current limiting material to interrupt the circuit in case of an overload or short circuit. The fuse has two contacts, one on either side, which are connected to either the power source or the equipment depending on the application. When current is travelling through the circuit, the internal strip of current limiting material expands, creating extra resistance and heat. If the current travelling through the circuit reaches the designated maximum value, the internal strip melts and the contacts break, interrupting the circuit and stopping the flow of current.

The 100C22X58AM/I fuse is designed to react quickly to current values that exceed its rated limit. The time to react is called the melting time and is measured in milliseconds. This is an important factor in choosing the right fuse for the application as a slow reacting fuse can cause damage to the equipment before it trips. The 100C22X58AM/I fuse has a 0.1 second melting time, making it well suited for applications where a fast reaction time is required.

Conclusion

The 100C22X58AM/I fuse is a specialty fuse designed for outdoor and indoor use in safety and general purpose industrial circuits. Its internal strip of current limiting material trips the circuit quickly when current values exceed its rated value. Its 0.1 second melting time makes it ideal for applications where reaction time is critical.

The specific data is subject to PDF, and the above content is for reference