10131933-226ULF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 10131933-226ULF is an electrical component specifically used in a variety of fieldbus applications. It provides bus termination and protection in distributed control networks, as well as an interface between fieldbus and device controllers. This device can also be used as a general-purpose interface within the system, allowing for remote devices to be connected to the system. The 10131933-226ULF is made of durable polyamide nylon and has a temperature rating of +85°C.

The 10131933-226ULF is equipped with two built-in voltage regulator circuits, allowing for the connection of different voltages. This helps to provide multiple power sources, ensuring a more reliable connection. The device also supports multiple device buses, allowing for the connection of a variety of external devices. In addition, it can be used to route signals between the device and the main bus.

The 10131933-226ULF has a typical operating voltage range of 8-30 VDC. Its insulation resistance is ≥100MΩ at 500V DC and the dielectric strength is rated at 1500V AC/minute. The device also has an extended mechanical life of more than 10 million cycles and an excellent surge protection of 3500V.

The 10131933-226ULF is designed to provide protection in distributed control networks. It works by protecting the devices and data lines against overvoltage and short circuit conditions. If an overvoltage or short circuit is detected, the device will activate a built-in surge protection circuit and shut down the affected data lines. This helps to protect the system from damage.

The 10131933-226ULF is also designed to provide isolation between the fieldbus and the device controller. This helps to reduce the risk of data corruption and to ensure that the proper levels of interference are not introduced into the system. The device provides isolation by using Faraday cages and voltage dividers to isolate the sources and destinations of the data signals.

The 10131933-226ULF also provides isolation for the application data. It works by utilizing an internal signal isolation switch, which is capable of selecting the data bus and the type of interface needed for the device. This helps to protect the device from any interference created by the external environment.

The 10131933-226ULF is a reliable, durable, and cost-efficient electrical component used in distributed control networks. Its multiple power sources and built-in surge protection make it an ideal choice for a variety of applications. In addition, its ability to provide isolation between the fieldbus and the device controller makes it an ideal choice for protecting data from outside sources.

The specific data is subject to PDF, and the above content is for reference