1046478-1 Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF)

Coaxial connectors are a type of electrical connector commonly used in a variety of radio frequency (RF) applications. This type of connector is equipped with a physical barrier that separates the center contact and the outer cover, or a dielectric, that can interlock between the two surfaces. This type of connector also utilizes a threaded fitting that provides a secure connection.

The 1046478-1 application field and Working Principle is typically used to connect coaxial cables to to circuit boards. The threads help to form a secure connection between the PCB and the connector ensuring reliable electrical connection with minimal signal loss. The 1046478-1 application field and working principle relies on the use of an insulating dielectric barrier that is formed around the center contact and the outer cover.

This dielectric barrier is responsible for providing a high degree of electrical insulation and signal prevention from other electronic components on the board. The dielectric barrier also serves to help ensure the secure connection is not affected by mechanical vibration.

The 1046478-1 application field and working principle relies upon the use of a threaded nut that is screwed onto the rear end of the connector. This nut presses against the chassis or any other external surface that the connector is attached to, and further tightens as it is gradually twisted. This tightening action makes sure that the threads are securely in place and therefore, the electrical connection remains uninterrupted.

The 1046478-1 application field and working principle design also utilizes a pair of RF absorber gaskets to further improve the electrical shielding. These gaskets are used in addition to the dielectric barrier to further decrease any potential RF interference that could be caused by the connector. The RF absorber gaskets help to reduce the amount of RF noise that enters into the electrical circuit, ensuring that the signal integrity is maintained.

In addition to the use of a threaded nut and RF absorber gaskets, the 1046478-1 application field and working principle also relies upon careful machining of the connector\'s outer surfaces. Proper machining is essential in order to ensure that the connection is properly insulated and maintains the correct contact pressure. This contact pressure is necessary in order for the connector to establish an adequate connection between the cable and the board.

The 1046478-1 application field and working principle is the preferred choice for a variety of RF applications that require a reliable connection and minimal signal interference. Thanks to the use of a threaded nut and RF absorber gaskets, the 1046478-1 application field and working principle provides optimal electrical insulation and RF interference prevention, while allowing for the construction of a secure connection.

The specific data is subject to PDF, and the above content is for reference