1050020:0041

1050020:0041 Application Field and Working Principle

Terminal blocks and marker strips are essential components in any electrical installation, manufacture or repair. Each element of these components is designed to fit into a specific application, where safety and dependable performance are desired. The 1050020:0041 terminal block is one such component, and this article will discuss the application field and working principle of this product.

Application Field

The 1050020:0041 terminal block is designed for use in an industrial environment, such as a factory or other similar setting. It is a four-pole, single-level terminal block, rated for a working voltage of 250VAC and currents of up to 10A. The four poles have dedicated connections for power, ground, and a signal, allowing for a wide range of potential wiring configurations.

This terminal block has an overall length of 60mm and a width of 28mm, with connections on both sides, allowing for mounting in even the tightest spaces. Its terminals are firmly attached to the body, ensuring a secure electrical connection. The device can be wired with either solid or stranded wire, depending on the application.

Working Principle

The 1050020:0041 terminal block is designed with a simple, reliable working principle. When wired for use, power and ground connections are routed from the block into the machine, and a signal line is routed from the machine into the block. The signal line is routed through a set of connecting terminals, which are then connected via silicone connectors.

These connectors are secured by a set of screw threads in the block, allowing for a firm and reliable connection without the need for additional soldering or clamps. The silicone connectors also provide further protection against EMI/RFI interference, ensuring a secure connection.

Once wired, the terminal block provides a dependable connection between the power, ground, and signal lines, allowing for a stable and reliable performance in the application.

Conclusion

The 1050020:0041 terminal block is a simple, dependable component designed for use in an industrial setting. It is designed with a four-pole connection, allowing for a wide range of wiring configurations, and it is rated for a working voltage of 250VAC and currents of up to 10A. The device is secured in place via a set of silicone connectors, which provide further protection against EMI/RFI interference.

Once wired, the 1050020:0041 terminal block provides a dependable connection between the power, ground, and signal lines, allowing for a stable and reliable performance. This makes it an ideal choice for a wide range of industrial applications.