108R-683H

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are passive electronic components that have an inductance which does not change significantly with voltage or current. The 108R-683H is a type of fixed inductor that is widely used in a variety of different applications. Fixed inductors are typically used in conjunction with capacitors in order to form a tuned circuit, or filter, which is used to filter out undesirable high or low frequencies from a signal.

The 108R-683H is a general purpose fixed inductor that is widely used in many electronic circuits. It is a three terminal device, consisting of a core, a winding and an inductance. The core material is typically iron-cobalt alloy or ferrite, while the winding material is typically copper. The inductance value of the 108R-683H is typically between 0.1uH and 10mH.

The 108R-683H can be used in applications ranging from power supplies, switching regulators and RF applications. In power supplies, the fixed inductor is typically used to filter out high frequency noise from the AC power source. In switching regulators, the inductor is used to create an LC filter that is used to filter out unwanted high frequency noise from the regulator output. In RF applications, the 108R-683H is often used to create a tuned circuit that is used to filter out unwanted noise from the transmitted frequency.

The working principle of the 108R-683H is based on the principle of Faraday’s law of induction. In essence, when a magnetic field is applied to a coil of wire, it induces a voltage in that coil. The magnitude of the induced voltage is proportional to the rate of change of the magnetic field, and it is also proportional to the number of turns in the coil. The inductance of the coil is a measure of its ability to store energy in the form of a magnetic field.

The 108R-683H is a high power inductor that is capable of handling up to 5A of current. The device is rated for an operating temperature range of -55°C to +125°C and has a maximum rated power of up to 720mW. The fixed inductor has a typical inductance tolerance of ±10% and a typical DC resistance of ±20%.

The 108R-683H is a widely used fixed inductor that is suitable for a variety of different applications. It can be used in power supplies, switching regulators and RF applications, and its performance is greatly enhanced by its high power rating and temperature range. The device is also relatively inexpensive and is widely available, making it an attractive choice for many designers.

The specific data is subject to PDF, and the above content is for reference