Allicdata Part #: | CCM1320-ND |
Manufacturer Part#: |
10VB6 |
Price: | $ 14.19 |
Product Category: | Filters |
Manufacturer: | TE Connectivity Corcom Filters |
Short Description: | LINE FILTER 250VAC 10A CHASS MNT |
More Detail: | N/A |
DataSheet: | 10VB6 Datasheet/PDF |
Quantity: | 116 |
1 +: | $ 12.89610 |
10 +: | $ 11.97320 |
25 +: | $ 10.13090 |
50 +: | $ 9.82394 |
100 +: | $ 9.20997 |
250 +: | $ 8.28898 |
500 +: | $ 7.98196 |
Series: | B |
Part Status: | Active |
Filter Type: | Single Phase |
Configuration: | Single Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 10A |
Frequency - Operating: | 50/60Hz |
Applications: | General Purpose |
Approvals: | CSA, UR, VDE |
Operating Temperature: | -10°C ~ 40°C |
Mounting Type: | Chassis Mount |
Termination Style: | Threaded Post (8-32) |
Inductance: | 495µH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Visual Basic 6 (VB6) is an application development tool used to create applications for today’s complex and powerful enterprise environments. One of the application fields it is frequently used in is Power Line Filter Modules, a type of passive filter which is used primarily for noise-free power transmission and communications. In this article we will take a look at the working principles of these filter modules and discuss how VB6 can help to create powerful applications to work with them.
Power Line Filter Modules are used to filter out high frequency and harmonic distortion components from the power line. They act as a barrier between the power source and the user device, ensuring that any high frequency noise that is generated by the power source is filtered out and that it does not interfere with the user device. These filter modules can provide a very high level of protection against electromagnetic interference (EMI).
The working principle of these filter modules is based on basic circuit design principles. The module contains multiple inductors and capacitors which are connected in series and/or parallel. The capacitors act as a low pass filter, blocking out the high frequency components and allowing only the low frequency components to pass through. The inductors act as a high pass filter, blocking out the lower frequency components and allowing only the higher frequency components to pass through. The combination of the two forms a bandpass filter which will allow only the desired frequency range to pass through.
The design of these filter modules is such that they can be easily tuned to block out the unwanted frequencies. They can also be tuned to provide very high levels of protection against EMI. In addition, they can be used to provide signal isolation and protection from electrical transients.
VB6 enables developers to create applications for working with Power Line Filter Modules. The development environment allows developers to create powerful applications that work with the filter modules and provide a wide range of features. The applications can be designed to control the filter modules, adjusting the settings based on user input. The applications can also be designed to show visual representations of the components of the filter module, or display real-time information such as power line quality or intensity of the signal passing through the filter module.
The application development process is fairly simple and straightforward. The developer will need to create an interface to the filter modules in the form of an ActiveX control, which is a reusable component that can be used in multiple applications. Once the control has been created, the developer can then create an application UI that will enable the user to control the filter module. From here, the developer can create the back-end logic of the application that will enable it to interact with the filter modules.
VB6 applications can also be used to provide control and monitoring of multiple Power Line Filter Modules simultaneously. This can be achieved by creating an application that can connect to and control all of the filter modules at once. This type of application can enable the user to easily adjust the settings of multiple filter modules in one go, and can also be used to monitor the performance of all of the filter modules in real time.
In conclusion, VB6 can be used to create powerful applications for working with Power Line Filter Modules. These applications can be used to control and monitor the performance of the filter modules, and provide many features to the user. By harnessing the power of VB6 and ActiveX controls, developers can create sophisticated and powerful applications for working with these filter modules.
The specific data is subject to PDF, and the above content is for reference
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT