114B Connectors, Interconnects

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Barrel audio connectors, otherwise known as 114B connectors, are used everyday in a wide variety of applications. These connections are often seen connecting line-level analog signals, with many consumer audio devices and professional audio components using them to stream audio data. But what are these connectors, and how do they work? Let’s start by filling you in on the basics.

What is a 114B Connector?

A 114B connector is a type of audio connector that consists of three parts: a plug (male connector), a jack (female connector) and an inner sleeve (barrel). The plug and jack are usually made of metal and provide a secure connection between the two parts. The inner sleeve is a plastic sleeve that houses the contacts and holds the plug and jack in place.

In a typical 114B connector, the plug has two contacts: a pin and a sleeve. The jack has two receivers to receive the contacts from the plug. The inner sleeve has two slots that hold the pins and sleeves in place. The sleeve also serves as insulation for the pins and helps to keep the connection secure.

Applications of 114B Connectors

114B connectors are used in a wide range of applications, from consumer audio devices to professional audio equipment. They are most commonly used to connect line-level analog signals, such as those found in a home stereo system or in a professional studio. They are often used to connect components in a professional audio system, such as microphones, amplifiers, processors and speakers.

These connectors are also widely used in automotive audio systems, connecting components such as speakers, subwoofers and amplifiers. They are also used in medical equipment to connect monitors and devices. 114B connectors are even found in some consumer electro-mechanic gadgets (e.g. gaming consoles).

Advantages of 114B Connectors

One of the main reasons why 114B connectors are so widely used is because of their cost-effectiveness. They provide a secure connection between two components, and they are relatively inexpensive to produce. They are also relatively easy to install, which helps to reduce installation costs.

Another advantage of the 114B connector is its durability. Because of its simple design, it has proven to be quite reliable over time. Since it does not use soldering, it is resistant to corrosion and oxides, making it a great choice for use in harsh environments.

Finally, the 114B connector offers an impressive level of data integrity. Because it does not use soldering, it can hold up to the high-frequency electronic signals that are used in modern audio systems.

Working Principle of 114B Connectors

When a 114B connector is plugged into a jack, the plug’s two contacts are inserted into the jack’s two receivers. Once inserted, the inner sleeve snaps into place, securing the contacts and preventing them from slipping out. This creates a secure and insulated connection that can transmit data without interference.

The level of performance achieved with a 114B connector is quite impressive. It provides a secure connection between two components, with little signal loss or interference. This makes it ideal for use in audio systems and other applications where reliability and data integrity are required.

The specific data is subject to PDF, and the above content is for reference