1206SFH150F/24-2 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are devices containing a fuse wire that is heated and weakened by current passing through it, causing it to melt and disconnect the circuit. The 1206SFH150F/24-2 Fuse is a surface-mounted, low-resistance, axial leaded, fast-acting, rectangular fuse. The 1206SFH150F/24-2 provides overcurrent protection for various types of electronics, including computers, office equipment, audio and video equipment, power supplies, and consumer electronics. This type of fuse is ideal for use in applications where a low resistance, fast-acting response is needed.

The 1206SFH150F/24-2 Fuse has a rated voltage of 250 volts AC, a rated current of 1.5 amps, and a fast-acting current-carrying capacity of 1500A. The fuse has a rated time delay of 10 msec at 500A, and a maximum length of 12.5mm. The 1206SFH150F/24-2 is constructed with an epoxy coat and has an energy rating of 30 watts. The fuse is UL listed and compliant with RoHS, UL, CSA, and CE standards.

The 1206SFH150F/24-2 can be used in a variety of applications ranging from protecting against reverse currents and electrical shorts to protecting against overloads and protecting against imminent catastrophic failure. The 1206SFH150F/24-2 can be used in automotive and industrial settings, as well as in residential and commercial settings. It can be used for protecting motors, transformers, electronic circuits, and control systems.

The working principle of the 1206SFH150F/24-2 Fuse is based on the idea that the current created when an overload or short circuit occurs will cause the fuse wire to heat up and melt, disconnecting the circuit and preventing the current from reaching catastrophic levels. The device is designed to break the current within a few milliseconds, providing essential protection to the components of the circuit. The fuse wire is composed of an alloy that is designed to heat and melt at specific current levels, providing highly effective protection for the circuit against short circuits and overloads.

The 1206SFH150F/24-2 Fuse is designed for use in a wide variety of applications and provides reliable overcurrent protection in a cost-effective manner. This type of fuse is easy to install and requires minimal maintenance. The 1206SFH150F/24-2 is an ideal choice for protecting against overcurrent, reverse currents, and protecting against imminent catastrophic failure in a variety of electronics applications.

The specific data is subject to PDF, and the above content is for reference