1245-7.7"X10"

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The application of 1245-7.7"X10" shielding and absorbing materials in both RFI (Radio Frequency Interference) and EMI (Electromagnetic Interference) protection has been growing over the last few years. The current technology allows for such materials to be even thinner than conventional ones, while still providing excellent shielding performance.

RFI and EMI protection is essential in many electronics applications, such as telecommunications equipment and signal processing systems. The frequency bandwidth of this type of shielding and absorbing materials ranges from extreme low frequencies (ELF) up to 10 GHz, and it can even provide protection against higher frequencies. It is also suitable for environments with high static fields.

RFI and EMI shielding is achieved through the use of 1245-7.7"X10" shielding and absorbing materials, which are capable of reflecting and absorbing the harmful radiation. The application of this type of shielding and absorbing materials is highly dependent on the frequency bandwidth, and on the actual type of material used. The most popular materials used are copper, silver, and aluminum, all of which are generally used in combination with a dielectric material.

The copper material is widely used in RFI and EMI shielding because of its high conductivity and resistance to corrosion. It is also low cost and highly malleable, making it a great choice for a variety of applications. The silver material has a high conductivity and is resistant to corrosion. It is also a great choice for RFI and EMI shielding, but it is more expensive than copper. Aluminum is also a good choice for RFI and EMI shielding; it is lightweight, corrosion-resistant, and highly malleable, but it is not as conductive as copper or silver.

1245-7.7"X10" shielding and absorbing materials are usually equipped with snap fasteners and/or self-clinching hardware. This allows them to be easily installed onto almost any surface. In addition, the material is often pre-treated with a radiation-absorbent coating, which can further reduce the amount of RFI and EMI radiation that can penetrate through the material. This type of material is also self-extinguishing, which means that it will help to prevent any fires that may be caused by the transmission of electromagnetic radiation.

The working principle of 1245-7.7"X10" shielding materials is based on the scientific concept of reflection and absorption. Reflection occurs when the incoming radiation is reflected away by the material. Absorption, on the other hand, occurs when the energy of the radiation is absorbed by the material. This absorption will reduce the intensity of the radiation and will also lessen its penetration into the material.

In order to obtain maximum performance from the 1245-7.7"X10" shielding and absorbing materials, it is important to install them correctly. The installation process should be done in accordance with the manufacturer\'s instructions and should include a careful inspection of the material before installation. Any damaged material should be replaced before the installation process is complete.

These types of shielding and absorbing materials have gained wide acceptance in recent years due to their superior performance in shielding and absorbing RFI and EMI radiation. They offer excellent performance at a great price, making them an attractive option for most electronics applications.

The specific data is subject to PDF, and the above content is for reference