1269AS-H-1R5M=P2 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, also known as chokes, are components that have a wide variety of uses in the electronics industry. 1269AS-H-1R5M=P2 is one type of fixed inductor. It consists of a coil of wire that is wound around a core material, which can be either inductor material or a material with a high permeability, such as ferrite. The coil is then connected to two terminals, which are used to connect the inductor to a circuit. The inductor is usually used to store energy in the form of a magnetic field, or to protect a circuit from undesirable frequencies.

The 1269AS-H-1R5M=P2 inductor has a wide range of potential applications. It is often used in circuits to filter out unwanted frequencies, such as radio signals or high-frequency noise. It can also be used in power supplies to reduce the ripple on the input signal. In addition, it can be used to improve the stability of an oscillator circuit, or as part of a tuned circuit where capacitors are connected in parallel with the inductor to form an LC filter.

The working principle of a 1269AS-H-1R5M=P2 inductor is based on Faraday’s law of induction. When a current is passed through the coil of the inductor, it creates a magnetic field. This field then induces a voltage across the terminals, which counteracts the current. This opposition to the current is referred to as inductance, which is measured in units of Henries. The inductor is also capable of storing energy in the form of a magnetic field, which can be released when necessary.

In addition to the applications mentioned above, the 1269AS-H-1R5M=P2 inductor can also be used in RF (radio frequency) applications. In these cases, the inductor acts as an antenna, receiving signals from the air and converting them into electrical signals that the circuit can process. The inductor can also be used as an impedance matching device, which helps to match the impedance of the circuit to the impedance of components such as antennas, amplifiers, and other components.

The 1269AS-H-1R5M=P2 inductor is a versatile and effective component, with a wide range of potential applications. Its working principle is based on Faraday’s law of induction, and it can be used to filter out undesirable frequencies, reduce ripple in power supplies, improve the stability of oscillator circuits, and act as an antenna or impedance matching device. This makes it an ideal choice for many different types of circuit applications.

The specific data is subject to PDF, and the above content is for reference