12FR010

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are electrical components that convert electric current to a desired resistance. The 12FR010 is one type of through hole resistor with a wide range of applications and a straightforward working principle.

The 12FR010 is a carbon film resistor. It is a type of resistor with a graphite track that features a high degree of electrical conductivity. Exterior insulation and protection are provided by a ceramic coating, typically varnished with epoxy resin. Its jack offers resistance values between 10 and 1.2kΩ, power ≦1/2W and ±5% tolerance with an axial tightening mechanism.

The 12FR010 is commonly found in a range of applications, such as medical devices, test and measurement equipment, remote control, digital displays, audio and video systems, automotive electronics and distributed control systems. Because of their strength and robustness, they are particularly suitable for mechanical, thermal, and environmental stressing.

The working principle of the 12FR010 is fairly simple. When a voltage is applied to the 12FR010, the electrical current it generates is limited by the amount of resistance present. The resistance within the 12FR010 causes a reduction in the size of the electrical current as it flows to the point where the potential voltage entries. Higher resistance levels in the 12FR010 cause more voltage drop across that resistance and less electrical current. Lower resistance levels cause less voltage drop across the resistor and more electrical current.

The12FR010’s working principles depend on an ohmic material, which allows the flow of electricity through it in proportion to the voltage applied, a phenomenon also known as Ohm’s law. This law states that the current through a conductor between two points is directly proportional to the voltage across the two points. The resistance between the two points is constant with respect to the current.

The 12FR010 can be used in both AC and DC circuits, making it a versatile component. Its robust enclosure makes it highly reliable and its voltage coefficient is so low that it can withstand both high and low voltage applications. Other features of the 12FR010 include a minimum electrical noise and a low inductance value.

In summary, the 12FR010 is a through hole resistor with a broad range of applications and straightforward working principle. It has a reliable enclosure and low inductance value and can be used for both AC and DC circuits. With its low voltage coefficient, it can withstand both high and low voltage applications. These features make the 12FR010 a popular choice for a number of applications.

The specific data is subject to PDF, and the above content is for reference