13008-012MESZ

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	High Reliability
Ratings:	COTS
Manufacturer Size Code:	E
Lead Spacing:	--
Height - Seated (Max):	0.173" (4.40mm)
Size / Dimension:	0.299" L x 0.173" W (7.60mm x 4.40mm)
Package / Case:	3017 (7644 Metric)
Mounting Type:	Surface Mount
Lifetime @ Temp.:	--
Series:	TANTAMOUNT®, 13008
ESR (Equivalent Series Resistance):	25 mOhm
Type:	Conformal Coated
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	680µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors: 13008-012MESZ Application Field and Working Principle

Tantalum capacitors are a type of electronic component used in circuits as both a low-pass filter and a bypass capacitor. They are the most common form of capacitors, and their versatility enables them to be used for virtually any electronic project. They are particularly effective as they tend to acquire a higher capacitance than traditional aluminum electrolytic capacitors. In this article, we\'ll discuss the 13008-012MESZ application field and working principle of tantalum capacitors.The 13008-012MESZ is an especially popular form of tantalum capacitor. It is a surface mount capacitor that is comprised of a single unit, much like an integrated circuit. It features two ground leads on either side of a core that is made of a mixture of various metals. This type of capacitor is available in both 500 volts and 250 volts. It may also come with an attached heat sink that can help to dissipate excess heat.The application field of the 13008-012MESZ tantalum capacitor is very broad. It can be used in all sorts of circuits, both analog and digital. This type of capacitor can also handle high-frequency signals, as well as low-frequency signals. It is also suitable for high-impedance applications where capacitors must be able to transmit current and act as a filter.The working principle of a tantalum capacitor, like any capacitor, is based on the effect of a capacitor’s electrical field on the current. A capacitor is made of two conductive plates. When a voltage is applied to one of the plates, it creates an electric field which draws electrons towards the other plate. This creates a positive charge on one plate and negative charge on the other. This alternation of charges creates a store of energy which is then used to transmit current.The capacitance, or ability to store energy, of a tantalum capacitor depends on the physical size of the capacitor’s plates. The bigger the plates, the higher the capacitance will be. The higher the capacitance is, the greater the amount of energy that can be stored. It should be noted that due to the nature of tantalum capacitors, their capacitance tends to be greater than traditional capacitors.All applications using a 13008-012MESZ capacitor require careful consideration of the peak current requirements. If the peak current requirement is too high, it is necessary to protect the capacitor by using a free-wheeling diode. This diode allows the capacitor to discharge gradually at low power, thus avoiding damage to the component while still providing current as necessary.In conclusion, the 13008-012MESZ is a versatile and reliable tantalum capacitor that is suitable for a wide range of applications. It features a high capacitance which makes it suitable for high impedance, frequency-dependent, and low power applications. While the peak current requirements should be taken into consideration when using this capacitor, the best way to protect it is to use a free-wheeling diode. This will allow the capacitor to discharge gradually, avoiding potential damage while still providing the necessary current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description