1301020087

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The 1301020087 application field and working principle is an integral part of many modern technological systems. It is used in a wide range of applications, from consumer electronics, medical imaging, and safety systems to defense and aerospace applications. The purpose of the 1301020087 is to provide data communication and promote the efficient operation of electronic systems.

The 1301020087 is a universal synchronous/asynchronous receiver/transmitter chip (USART). The chip allows full-duplex asynchronous communication between two devices over a single communication line. It has various functions including data framing, bit synchronization, parity bit generation and detection, byte reception, byte transmission and interrupt handling. The USART can also be used to implement communication networks such as Modbus and Multidrop.

The 1301020087 works with synchronous and asynchronous data transmission systems. In synchronous systems, the transmit and receive clocks are generated on the same device. This type of system is often used for dial-up connections because the same device is used to generate the clock signals. Asynchronous data transmission systems use one device for clock generation and another for data reception and transmission. This type of system is more commonly used for computer networks and modems.

The chip features four operating modes. The first three are: asynchronous reset, synchronous reset and asynchronous operation (ASYRES, SYNCRES and ASYOPM). The last mode is the RECOVERY MODE (RECOV). During ASYRES, the chip performs a full reset of all registers and enters the recom operation mode. During SYNCRES, the chip performs a full reset of all registers and the clock is synchronized. During ASYOPM, the chip is in asynchronous operation mode and the clock is asynchronous, meaning it is not tied to an external clock source. The RECOVERY MODE is used to reset the chip after errors have occurred.

The 1301020087 features an on-chip oscillator and an asynchronous receiver and transmitter. The oscillator controls the clock rate of the data communication. The receiver is responsible for receiving data bits and converting them to bytes. The transmitter is responsible for converting the bytes back into bits and then sending them out through a serial data line. The chip also features a FIFO buffer, which is used for storing data before it is sent and received. The FIFO can also be used to control the flow of data.

The 1301020087 also has several interrupts, which allow it to generate interrupts when data is transmitted or received. It can also generate interrupts when certain conditions are met, such as when there is no data to be transmitted or received or when a time-out limit is exceeded. Interrupts allow the chip to communicate with other devices and systems quickly and efficiently.

The 1301020087 chip has many uses in the modern technological world. It is a key component in many consumer electronics, medical imaging and safety systems. It is also used in military and aerospace applications. The chip is an important tool for data communication and helps to promote the efficient operation of many electronic systems.

The specific data is subject to PDF, and the above content is for reference