1301020245

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1301020245 is a high frequency solid-state relay used in industrial equipment.

A solid-state relay (SSR) is a device used as a switch to control an electronic device, typically in industrial automation applications. These devices use semiconductor electronics technology to accomplish the switching operation, as opposed to an electromechanical relay that utilizes an electromagnetic activation coil, an armature, and electrical contacts. 1301020245 SSRs use several different operating principles including Zero-Crossing, Random Turn-On, Burst Fired, and Contact-Closure for many different types of applications.

Zero Crossing SSRs are designed to switch power at specific ‘Zero-Crossing’ points where the voltage signal is at a crest or trough between the positive and negative voltage waveforms. This design uses the smallest amount of energy when switching a load and eliminates the possibility of ‘contact-bounce’ due to voltage overshoot. The Zero Crossing design is usually preferred when switching inductive loads.

Random Turn-On SSRs are designed by controlling the random turn-on time of the device. This type of SSR provides a random turn-on time within its operational window. It was designed for applications such as dimmer switches, as it reduces the chance of transient electrical surges during turn-on. The Random Turn-On SSR is periodically tested to determine the amount of energy it consumes during normal operation.

Burst Fired SSRs are designed to switch on at the specific ‘turn-on’ point and then require a burst of electrical pulses for it to remain activated. The duration of each burst is based upon the input signal and the characteristics of the load being controlled. This type of design is used in applications where a high degree of accuracy and repeatability is required.

Contact-Closure SSRs are designed to close contacts when a voltage signal is applied to its input terminals. The contacts will remain closed until the signal is removed. This type of SSR is generally used in applications where it must open and close a circuit in order to activate a specific device or system.

1301020245 SSRs are typically used in industrial applications such as motor control systems, chopper circuits, heating and cooling control systems, switch-mode power supplies, robotics, and process control systems. It is important to choose the appropriate type of SSR for the application and ensure all of the operational specifications are met for optimal performance. It is also important to note that improper installation and wiring of these devices may create an unsafe environment which may cause personal injury or damage to equipment.

In conclusion, 1301020245 is a type of solid state relay that is used in a variety of industrial applications. The device uses four different operating principles, Zero-Crossing, Random Turn-On, Burst Fired, and Contact-Closure, to control different types of loads. Its high reliability and low cost allow it to be used in a variety of applications. Proper installation and wiring are essential in order to ensure safety and optimal performance.

The specific data is subject to PDF, and the above content is for reference