1301530096

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A Ground Fault Circuit Interrupter (GFCI) is an integral part of the electrical safety system in many modern homes and businesses. The device is designed to detect when a current is leaking to ground and automatically shut off the power to the circuit before a user can be harmed by electric shock. The 1301530096 is a type of GFCI commonly used in homes and businesses.

The 1301530096 GFCI works by comparing the amount of current flowing through the “hot” wire and the “neutral” wire. If the amount of current in the two wires is not the same, then it means that there is a ground fault somewhere in the circuit. The device will instantly shut off the power to the circuit in order to prevent an electric shock. The 1301530096 also has an internal resistor. This resistor keeps the device from shutting off the power when there is a minor current leak, such as when an appliance is plugged in or unplugged.

This type of GFCI is designed for indoor use only and must be installed on a “dry location”. It can be used in bathrooms, kitchens, garages, and other areas where there is a risk of electric shock. The 1301530096 GFCI is rated for 15 amp, 120 volt circuits and should not be used on circuit with higher currents or voltages. The device contains a test button which can be used to test the device to make sure it is working properly.

When installing the 1301530096 GFCI it is important to note that it must be wired correctly in order to work properly. The device has two separate terminals, one for the “hot” wire and one for the “neutral” wire. In addition, the device must be connected to a ground wire. This ground wire helps the device detect any current that is leaking to the ground.

The 1301530096 GFCI is a relatively simple device that can help protect a user from electric shock. It is designed to detect any current that is leaking into the ground and will instantly shut off the power in order to prevent electric shock. The device must be wired correctly in order to work properly and should be tested periodically to make sure that it is functioning correctly.

The specific data is subject to PDF, and the above content is for reference