Termination:	Crimp
Material - Insulation:	--
Insulation Diameter:	--
Contact Finish:	Tin
Contact Material:	Copper
Color:	--
Features:	Serrated Termination
Insulation:	Insulated
Wire Gauge:	16-22 AWG
Series:	PIDG
Mounting Type:	Free Hanging (In-Line)
Length - Overall:	0.807" (20.50mm)
Width - Outer Edges:	0.217" (5.50mm)
Thickness:	0.031" (0.79mm)
Stud/Tab Size:	--
Terminal Type:	Flat Sided
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminals - Ring Connectors

The 130451 ring connector is an electrically insulated crimp type terminal which is used for connecting wire harnesses. Telephone wires, data-processing equipment, demoboard fixtures, wire gauges and heavy-duty relays are the applications which it is designed for and could be just a few of the countless uses for this type of terminal. Unlike other similar component types like spring or spade terminals, ring connectors are capable of a higher current rating and normally provide a stronger connection. The main advantage of this connector is the 1/2 inch size which provides better contact with devices that require smaller wires and a higher number of wires since each connection takes up very little space. Furthermore, the ring connector is insulated plastic and much less likely to be affected by environmental conditions and thus more electricand smoke resistant. When it comes to the construction of the 130451 ring connector, the insulation material is engineered polyester which has excellent electrical properties, good weathering and temperature resistance, and a higher melting temperature. The cable connection involves an insulated copper alloy contact which is securely fastened to ground with a crimp tool. The cable connection is held snugly in place by the fibers of the insulation material which minimize heat transfer and contact good quality. The insulation corresponds to class H, IEC 60228, rocker type or any suitable ISO/IEC 1082 standard.To make a connection with the 130451, start by preparing the cable. Trim the cable ends to an appropriate length, then use a mechanical stripping tool to remove the insulation. With stripped wires, it is important to separate each individually so that the sheathing and crimp can be correctly applied. Afterwards, adhere to the instruction provided with the connector for correct wiring arrangement. Once the wiring is ready, use the crimp tool to fasten the cable. The crimp tool is comprised of two parts: a jaw and an anvil. Place the wire between the two parts and gently squeeze until the jaws meet the insulation and crimp, forming an indentation that will hold the conductor securely. The crimp tool must be ready and trimmed to correctly form the wire in one action. Misfiring the crimp tool can damage the insulation and reduce the quality of the connection.Finally, the connection can be tested and confirmed with a continuity tester. Upon completion, the 130451 provides a secure connection that is ideal for any applications requiring a reliable low impedance connection. It can be used in any setting such as cars, boats, planes, home networking or industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description