1325-391K

DC Resistance (DCR):	220 mOhm Max
Height - Seated (Max):	--
Size / Dimension:	0.133" Dia x 0.260" L (3.38mm x 6.60mm)
Supplier Device Package:	--
Package / Case:	Axial
Mounting Type:	Through Hole
Inductance Frequency - Test:	25MHz
Operating Temperature:	-55°C ~ 105°C
Ratings:	--
Frequency - Self Resonant:	207MHz
Q @ Freq:	42 @ 25MHz
Series:	1325
Shielding:	Shielded
Current - Saturation:	510mA
Current Rating:	510mA
Tolerance:	±10%
Inductance:	390nH
Material - Core:	Iron
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are widely used in a variety of electronics applications. The most common application areas involves home appliances, computers and other electronic devices such as mobile phones and tablets. Commonly used inductors are also employed in power electronics, communications, automotive and audio applications. Fixed inductors generally consist of two essential parts: an electrical core and a surrounding source of magnetic field. An electrical core is usually made of a coil of insulated copper wires. The surrounding source of a magnetic field is normally a ferromagnetic material, such as a ferrite or an iron core. The type of inductor used in an electronic device depends on its application. The 1325-391K is an example of a standard inductor used in a variety of applications, including cell phone development, network entertainment systems, and satellite navigation systems. The 1325-391K inductor is a common fixed inductor with a rated inductance of 0.0500 microhenry (µH). Its resistance is rated at 1 Ohm with a current rating of 0.25 Amps, making it suitable for a variety of purposes. This type of inductor is also commonly used in motor-control circuits, audio amplifiers, and inverter circuits, and can be found in many electronic circuitry products. The working principle of the 1325-391K inductor relies on basic electromagnetic principles. In order to produce an induced voltage, we must first establish a changing magnetic field. This is achieved by passing a current through the electrical core, which in turn creates a varying magnetic field. This changing magnetic field induce a current in the neighbouring circuit and this current is called the induced current. The amount of induced voltages and currents can be calculated using Faraday’s law of induction. Faraday’s law states that the induced voltage in a closed loop circuit is equal to the time derivative of the total magnetic flux inside the circuit. The total magnetic flux, however, is proportional to the number of turns of the coil. So, by increasing the number of turns of the coil, the total magnetic flux increases, thus increasing the induced voltage.The 1325-391K inductor is an efficient fixed inductor, which is used in many applications where precise control of an electrical current is needed. This makes the 1325-391K inductor a much more efficient option compared to other inductors. Moreover, this inductor can also be used in a variety of other application areas such as power electronics, communications, and automotive. The 1325-391K inductor works according to the principles of electromagnetic induction and is used in many battery based applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description