135D406X9075T6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors Explained

Tantalum capacitors are a type of capacitor, a device used to store electric charge. They are, like other capacitors, passive electrical components consisting of two electrodes that are separated by a dielectric material. These capacitors are used in many different applications, however the 105D406X9075T6 model of tantalum capacitor is an especially versatile option.

105D406X9075T6 Application Field

The 105D406X9075T6 is a surface mount tantalum capacitor, which is a type of capacitor that is typically small, lightweight, and used in printed circuit boards. This particular variant is extremely widely used, often in the automotive, military, and industrial sectors. It is also used in audio equipment, where it’s low profile size allows it to fit into confined spaces.

In the automotive sector, the 105D406X9075T6 is employed to maintain electrical continuity and protect the vehicle\'s sensitive circuitry from transients. It is also used to filter out any high-frequency signals that may pass through the system, and it commonly used as a decoupling capacitor in engine control and powertrain systems. In the military sector, the 105D406X9075T6 may be used in radar and onboard control systems.

105D406X9075T6 Working Principle

The primary function of any capacitor is to store electric charge, and the 105D406X9075T6 is no exception. This model’s working principle is based on that of any other capacitor. When a potential difference is applied to the capacitor, it allows electric current to flow from one of the electrodes to the other, and this stored charge remains until it is discharged again or the potential difference is removed.

The 105D406X9075T6 is a surface mount tantalum capacitor, which refers to the way in which the capacitor is implanted onto the circuit board. Unlike traditional capacitors, the surface mount capacitor does not require soldering. Instead, it is inserted into a designated hole on the printed circuit board which is then heated up, allowing the capacitor to become fused to the board. This can greatly reduce the time taken to install the capacitor, as there is no need for further soldering or wiring to take place. Additionally, the small size of the 105D406X9075T6 allows it to fit into tight, compact spaces which can sometimes be difficult with traditional capacitors.

Advantages of the 105D406X9075T6

The 105D406X9075T6 offers a great many advantages over other capacitor models. As with all tantalum capacitors, the 105D406X9075T6 has an increased capacitance value with equivalent capacitance ranges compared to traditional models. Additionally, unlike traditional capacitors, this model’s capacitance value is stable over a wide range of temperatures, allowing for reliable performance in varying temperatures.

Tantalum capacitors, in general, are much smaller than traditional capacitors, with the 105D406X9075T6 boasting a miniscule size of 0.4” x 0.09” x 0.06” and a weight of only 0.2 grams. This small size is invaluable in the automotive and military sectors, where size and weight are always an issue. Furthermore, this model is highly reliable and efficient, and offers low equivalent series resistance values that are far lower than those of traditional models.

Drawbacks of the 105D406X9075T6

The 105D406X9075T6 is an extremely effective capacitor, however, it is not without its drawbacks. The most significant disadvantage is that the 105D406X9075T6 exhibits a relatively short shelf life due to excessive self-discharge. Additionally, the voltage rating of the 105D406X9075T6 is somewhat lower than that of other capacitor models, meaning that it may not be suitable for all applications.

Conclusion

The 105D406X9075T6 is a highly reliable and efficient surface mount tantalum capacitor, providing significantly more capacitance than traditional capacitor models with a much smaller size. It has a wide range of applications in the automotive, military, and industrial sectors, and is highly capable of filtering out high-frequency signals while protecting delicate circuitry from transients.

Despite its advantages, the 105D406X9075T6 also has some drawbacks such as a relatively short shelf life and low voltage rating when compared to other capacitor models. But overall, the 105D406X9075T6 remains a valuable asset in many different fields due to its capabilities.

The specific data is subject to PDF, and the above content is for reference