1487L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Shunts, Jumpers, and 1487L Applications and Working Principle

The 1487L is a dc shunt type jumper switch rated for both dc and ac operations. It is designed to switch multiple amp and volt circuits between two or more power sources or loads. Its key features include voltage isolation and convenience of installation, as well as increased safety in hazardous hazardous-duty environments. The 1487L also provides superior performance in a wide range of industrial applications.

Shunts are devices that are used to connect two or more pieces of electrical equipment in a circuit. They are commonly used to connect high-resistance elements such as resistors or inductors to ground, allowing the current to be routed in accordance with Ohm\'s Law. Shunts can also be used to form parallel circuits, allowing current to flow over a different path, or they can be used to divide current along separate branches. The 1487L jumper switch is a high-current shunt capable of handling a maximum of 600 amps (AC) or 300 amps (DC).

Jumpers are similar to shunts, as they are used to connect two pieces of equipment in a circuit. However, jumpers have a different set of functions from shunts, and they are typically used for temperature control, voltage regulation, and signal processing. The 1487L jumpers have a wide range of applications, including circuit interrupt temporary bridging, resistors, contactors, magnets, metering, relays, and more.

The 1487L has an extensive list of features that make it an ideal choice for industrial applications. Its switching capacity allows for an internal contact gap of 0.2 mm, which prevents any arcing and short circuit breakdowns. It also has an operating temperature of -20°C to 105°C and the ability to switch up to 600 amps (AC or DC). The 1487L is designed to be easy to install and maintain and is capable of operating with minimal noise, vibration, and wear.

The 1487L is a dependable and reliable switching solution for a wide array of industrial applications such as metering and motors. It is designed to provide a secure and resilient electrical connection. The 1487L is also suitable for use in hazardous environments due to its high current-switching capacity and voltage-isolation capability. Its small size and lightweight construction make it perfect for tight installations without compromising its performance.

The 1487L jumper switch works by allowing an electrical current to travel between two or more interconnected circuits. This is done by using a set of contacts, or “jumper terminals”, that can be moved electronically to enable the current to flow. This eliminates any risk of arcing or shorts. As the contacts move, they generate a voltage drop, which is used to control the switch’s motion. By adjusting the voltage drop in the jumper terminals, the switch can be used to switch a maximum of 600 amps (AC) or 300 amps (DC).

In conclusion, the 1487L is a great choice for industrial applications that require secure current-switching capabilities. Its shunt and jumper technology ensure that maximum current is delivered with minimal losses. Its voltage-isolation capability increases safety in hazardous environments, while its small size and lightweight design allow for easy installation in tight spaces. The 1487L also has the ability to switch up to 600 amps (AC or DC).

The specific data is subject to PDF, and the above content is for reference