14FPR100E

Series:	10
Packaging:	Bulk
Part Status:	Active
Resistance:	100 mOhms
Tolerance:	±1%
Power (Watts):	4.5W
Composition:	Metal Element
Features:	Current Sense, Non-Inductive
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.335" Dia x 1.059" L (8.51mm x 26.90mm)
Height - Seated (Max):	--
Number of Terminations:	4
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are components of an electronic circuit which provide a specific amount of resistance to control the flow of current. They are mostly used in high-power applications, because their size allows them to dissipate considerable heat. One type of through-hole resistor is the 14FPR100E. This resistor is particularly well-suited for high-current applications due to its high power rating (100W) and its high resistance rating (1000 Ω).

14FPR100E Application Fields

The 14FPR100E has a variety of applications due to its high power rating and high resistance rating. It is most commonly used in power electronic equipment, such as personal computers and test equipment, as well as in consumer electronics, such as television sets and radios. It is also used in a variety of industrial applications, such as welding and soldering machines, inverters, and electrical testing and diagnostic equipment.

Working Principle of the 14FPR100E

The principle of operation of the 14FPR100E relies on the four basic laws of electricity: Ohm’s Law, Kirchoff’s Voltage Law, Kirchoff’s Current Law, and Joule’s Law. Ohm’s Law states that the voltage across a resistance is proportional to the current through it. Kirchoff’s Voltage Law states that the sum of voltages in a closed loop must be zero. Kirchoff’s Current Law states that the sum of currents entering a node must equal the sum of currents leaving the node. Lastly, Joule’s Law states that the heat produced by an electric current is proportional to the square of the current and the resistance of the circuit.In the case of the 14FPR100E, the current passes through the wire and is resisted by the resistor. The amount of current that passes through is regulated by the resistor’s resistance rating (1000 Ω). This means that a higher voltage will result in a higher current, and a lower voltage will result in a lower current.The heat dissipated by the resistor is necessary for the proper functioning of the resistor. The higher the voltage, the more current passes through the resistor, and the more heat will be dissipated. The resistor is able to dissipate this heat because it is a large, through-hole component with plenty of room for heat dissipation.The 14FPR100E also features an internal fuse for protection. This protective feature ensures that the resistor does not overheat due to an excessive current. It works by cutting off the current to the resistor if the current becomes too high.In conclusion, the 14FPR100E is a through-hole resistor which is used in a variety of high-power applications due to its high power rating and high resistance rating. It works by using Ohm’s Law, Kirchoff’s Voltage Law, Kirchoff’s Current Law, and Joule’s Law to regulate the flow of current through the resistance. The resistor is also protected by an internal fuse which will cut off the current if it becomes too high to ensure that the resistor does not overheat.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description