14SP-L1-02-R Switches

Series:	14
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Keyswitch, Illuminated
Circuit:	SPST-NO
Switch Function:	Off-Mom
Current Rating:	100mA (DC)
Voltage Rating - DC:	30V
Actuator Type:	Round, Button
Color - Actuator/Cap:	Clear
Illumination Type, Color:	LED, Red
Illumination Voltage (Nominal):	2 VDC
Mounting Type:	Surface Mount
Termination Style:	SMD (SMT) Tab
Ingress Protection:	IP67 - Dust Tight, Waterproof
Features:	Board Guide
Panel Cutout Dimensions:	--
Operating Temperature:	-40°C ~ 85°C
Mechanical Life:	200,000 Cycles
Electrical Life:	200,000 Cycles

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The 14SP-L1-02-R belongs to the category of Pushbutton Switches, and it is suitable for use in many types of applications. Pushbutton Switches are a type of mechanism that is used to control motors and other machinery. They are usually operated by pressing a button, usually with a finger, or by using a mechanical lever. They are commonly incorporated into the control systems of factory equipment, engine controllers, and other machinery.

Application Field

The 14SP-L1-02-R is suitable for use in a wide range of applications, including automotive, industrial, and marine scenarios. In automotive scenarios, it can be used to control the speed and direction of a motorized vehicle. It can also be used to regulate the flow of cooling and heating air into an engine compartment or compartment of other machinery.In industrial scenarios, the switch can be used to control the operation of hoists and cranes, or to reduce the intensity of an unshielded light source. It can also be used in conjunction with a motor controller to adjust the speed of a conveyor belt or the rotation of a motor. In marine scenarios, the 14SP-L1-02-R can be used to manually engage and disengage different systems on the boat. It can be used to control the rudder, throttle, and other important equipment. It can also be used to adjust the settings of navigation equipment, such as sonar, radar, and GPS.

Working Principle

The 14SP-L1-02-R is typically operated by pressing a button, either with a finger or with a lever. When the button is pressed, it sends a signal to the circuit board. This signal is used to control the direction or intensity of the motor or other machinery. If the signal is strong enough, the machinery will respond and adjust to the signal that was sent.When the button is pressed, it makes contact with two contact points. These contact points are connected to a circuit board. When the two contact points make contact, an electric current is sent through the circuit board. This electric current is then used to control the operation of the machinery. In addition to being operated by a button, the 14SP-L1-02-R can also be operated with a lever. This lever is connected to the circuit board, and when it is moved, the circuit board sends an electric signal. This signal is used to control the intensity or direction of the motor or machinery.

Conclusion

The 14SP-L1-02-R is an ideal switch for a wide range of applications, particularly those that involve motorized vehicles and industrial equipment. It is suitable for use in automotive, industrial, and marine scenarios. It can be operated by pressing a button with a finger, or by using a mechanical lever. When the button is pressed, or the lever is moved, it sends an electric signal to the circuit board, which is used to control the intensity or direction of the motor or machinery.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description