150D566X9006B2T

Lifetime @ Temp.:	1000 Hrs @ 125°C
Failure Rate:	--
Features:	General Purpose
Ratings:	--
Manufacturer Size Code:	B
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.185" Dia x 0.474" L (4.70mm x 12.04mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Series:	TANTALEX®, 150D
Operating Temperature:	-55°C ~ 125°C
ESR (Equivalent Series Resistance):	--
Type:	Hermetically Sealed
Voltage - Rated:	6V
Tolerance:	±10%
Capacitance:	56µF
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Tantalum Capacitors

Tantalum capacitors, usually referred to as “tantalum capacitors,” are an important type of capacitor. They are made from the rare element of tantalum and feature a tantalum metal oxide film on their surfaces. This film is highly resistant to corrosion and oxidation making them an ideal choice for many electronic applications.The designations, such as 150D566X9006B2T, refer to the capabilities of these capacitors. It suggests that the capacitance of the capacitor is 150 nanofarads. The temperature rating of the part is 85°C, and it has a voltage rating of 6 volts. Furthermore, the “B” indicates the lead style used for mounting the capacitor. The final “2T” suggests the capacitor has two terminals.The most typical application for 150D566X9006B2T tantalum capacitors is for applications requiring moderate voltage and high reliability. These capacitors are often used in applications such as consumer electronics, instrumentation, and medical equipment. In the PCMCIA slot, they provide a low power solenoid to actuate the card ejector latch. They are also used in cell phone flashes, radio communications, aerospace electronics, and the automotive industry. These tantalum capacitors acquire their capacitance from the film of tantalum metal oxide that coats their surfaces. The construction of the capacitor features a tantalum anode and either a manganese dioxide cathode or polymer cathode system. The oxide film acts as the dielectric material separating the two plates and is responsible for the capacitance of the device.The oxide film also responds to an applied voltage in a similar manner as a ceramic capacitor; it builds up charge until it reaches the rated voltage and then it stabilizes. The applied voltage must always remain below the rated voltage, otherwise it can cause damage to the oxide layer and cause the capacitor to become permanently non-functional. These capacitors have a high energy density and excellent heat stability, but due to their construction, they can demand higher prices, have less capacitance than electrolytic capacitors, and have limited capacitance values. These devices are also quite sensitive to high temperatures and humidity and may operate erratically when exposed to temperatures exceeding 120°F.Besides providing an important element of the circuit, 150D566X9006B2T tantalum capacitors are also often used as a surge and noise-suppression device. This helps to reduce interference on the circuit by preventing high-frequency signals from reaching terminals on components not designed to handle the signal.Overall, the 150D566X9006B2T tantalum capacitor is an important component for many electronic applications. It is an ideal choice for moderate voltage, high reliability applications. This type of capacitor is highly resistant to oxidation and provides high energy density and excellent heat stability. It is also often used as a surge and noise suppression device. Despite its higher cost and careful handling, the tantalum capacitor is an excellent choice for these applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description