150D566X9020S2BE3

Tantalum Capacitors

A tantalum capacitor is a special type of capacitor that is based on a form of electrolytic capacitor. Tantalum capacitors have a higher capacity and voltage rating than other type of capacitors. The construction and design of the tantalum capacitor depends on the application field.

The tantalum capacitor is primarily used for noise and signal filtering, decoupling of negative voltage, input protection, output buffering, and power conditioning. Tantalum capacitors are made with a tantalum oxidation anode, which is covered with a thin film of electrolytic material or tantalum pentoxide. The pentoxide forms a dielectric between the anode and the cathode.

150D566X9020S2BE3 Application Field and Working Principle

150D566X9020S2BE3 tantalum capacitors are a type of low profile surface mount device that is designed for filtering, blocking, and/or coupling applications. These capacitors have a low profile design which makes them suitable for board space constrained designs.

The working principle of 150D566E9020S2BE3 is based on the electrolytic properties of tantalum. When voltage is applied to the capacitor, the electric current passes through the anode and cathode, where it is reduced in the dielectric layer between them. The electric charge stored in the capacitor is dependent on the amount of current that can pass between the anode and the cathode.

150D566X9020S2BE3 capacitors are designed for space efficient applications in signal and power flow control. The choice of capacitance value and package size makes it possible to tailor the performance to the application. By using a larger package size, the electromagnetic interference (EMI) can be reduced.

150D566X9020S2BE3 tantalum capacitors are used for applications such as filtering, blocking, and decoupling of high frequency signals, input protection, output buffering, and power conditioning. They are designed for low impedance power supply applications and are well-suited for switching power supplies, telecommunication systems, point-of-load applications, and high-density boards.

The 150D566X9020S2BE3 tantalum capacitor is an excellent choice for space constrained designs that require a high capacitance value. The low profile surface mount design makes it easy to install and provides a cost-effective solution for a broad range of applications.