1594670000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks - Wire to Board

Terminal blocks are used to connect two pieces of electrical equipment, usually a wire from one device to another. They come in a variety of sizes and shapes, and can provide both permanent and temporary connections. The most common type of terminal block is the wire-to-board type, which is used to interconnect two electrical components. This type of terminal block is typically used for industrial and commercial applications, such as in manufacturing machines and lighting systems.

Wire-to-board terminal blocks are available in a range of sizes, from standard-sized blocks to miniaturized ones. The most common sizes are spring-clamp terminal blocks, which have small clamps or contact fingers inside them which are used to identify and connect the two wires together. There are also screw-down terminal blocks, which have a screw terminal or a rivet terminal to secure the wire. These types of terminal blocks are used for more permanent connections and can provide higher current carrying capacity.

Terminal blocks are usually rated for a certain voltage and current. This voltage rating is usually printed on the terminal block itself and the current rating is usually specified in the product\'s data sheet. It is important to check the ratings before connecting any electric components in order to prevent damage or injury.

When using a wire-to-board terminal block, it is essential to double check the pins for proper fitting and connections. Different pins for different wires are usually color coded. It is not uncommon for different types and brands of terminal block to have their own codes and conventions. Make sure to follow the appropriate instructions when connecting different parts.

Once the wires are hooked up, it is important to secure the terminal block so it won\'t come loose! A simple screwdriver is usually enough to properly tighten the screws. It is also important to waterproof the wires with either electrical tape or heat shrink tubing. This will help prevent short circuits and prolong the life of the terminal block.

Terminal blocks are a useful and versatile tool which are widely used in many electric applications. They are relatively cheap, easy to use and maintain, and can provide a secure connection between two electrical components. With proper selection and usage, they can provide reliable power and signal connections for a variety of applications.

The specific data is subject to PDF, and the above content is for reference