160392J1000D-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are capacitors with a dielectric consisting of a thin plastic film. They are based on application-specific suits involving polymers, most commonly polyester (PET, PEN), polypropylene (PP), polyfoil, and polystyrene (paper-styrene).

The construction of a film capacitor typically consists of two electrodes (most commonly aluminum) separated by a thin dielectric polymer film, which can be either organic polymer (PET, PP etc.) or inorganic material (AlOx, SiO2, etc.). The electrodes and film can be laminated and wound together to form a roll or slipped in an all-plastic container, depending on the type of capacitor, the application and other factors.

The 160392J1000D-F application field and working principle can be used in a wide range of applications, ranging from AC coupling, bypassing, digital decoupling, pulse applications, and other uses that require shielding from strong RFI/EMF. As with any other capacitor, film capacitors are most commonly used to store energy in the form of electrical charge, acting as a buffer between the power supply and load. It also acts as a low-pass filter that blocks high frequency noise from damaging the device or transferring it to other circuits.

The working principle of the 160392J1000D-F is to "sink" the relatively high-frequency noise at the source by introducing capacitive reactance (Xc = 1/2πfC) into the circuit. The film capacitor acts like an open circuit at frequencies much higher than the resonance frequency (fo= 1/2π√LC) of the LC circuit, which means that the high-frequency noise is dissipated by the capacitor and not allowed to enter the device, protecting it from damage. The working principle also helps in controlling the amount of power transferred from the capacitor to the output condenser, thus allowing generation of more power without losing much of it due to high frequency noise.

In addition, film capacitors are also used in radio frequency circuits for impedance matching applications. They are used to match the impedance of the source to the load, and reduce the power losses due to transmission line effects. Furthermore, film capacitors are also increasingly used in power supplies, providing a means of temporarily storing and controlling current in order to reduce voltage spikes.

Overall, the 160392J1000D-F is a reliable and efficient film capacitor which can be applied in many types of applications. They are highly cost-efficient and offer a reliable and efficient way of controlling current and voltage in many applications. It is an essential tool in many electronic systems to ensure the safety and integrity of the circuits. The 160392J1000D-F is ideal for the applications mentioned above, and it can help to greatly enhance system reliability and performance.

The specific data is subject to PDF, and the above content is for reference