1632820000

Mounting Type:	Through Hole
Screw Thread:	M3
Torque - Screw:	0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Copper Alloy - Tin Plated
Housing Material:	Polyamide (PA66), Nylon 6/6
Operating Temperature:	-20°C ~ 100°C
Color:	Orange
Features:	--
Wire Termination:	Screw - Clamping Yoke, Tension Sleeve
Series:	Omnimate LP
Wire Gauge:	12-26 AWG
Voltage:	300V
Current:	15A
Mating Orientation:	Horizontal with Board
Pitch:	0.197" (5.00mm)
Positions Per Level:	21
Number of Levels:	2
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal Blocks-Wire to Board Overview

Terminal Blocks-Wire to Board is a type of electrical connectors that is used to interconnect printed circuit boards and panel terminals. These types of electrical connectors are also used for wiring between two or more devices on a single circuit board. The term terminal block is derived from the fact that the connection point is held in a single block, which has been designed to provide for various types of connections.Terminal blocks range in size and complexity depending on their intended application. In general, terminal blocks consist of two pieces – the top, which contains the electrical contacts, and the bottom, which is usually plastic and contains mounting holes. The top and bottom pieces are joined by screws or clips. The contacts may be divided in two halves, one for each side of the connection. The number of contacts in a terminal block depends on the type of connection, and the number of connections required.

Types of Terminal Blocks-Wire to Board

Terminal Blocks-Wire to Board vary in terms of variety, basic design, features, and type of connection. In general, there are three primary types of wiring components available: single-pole terminal blocks, double-pole terminal blocks, and multi-pole terminal blocks.Single-pole terminal blocks are the most basic type of connection, and are typically used to interconnect two devices on a single circuit board. They consist of one contact on one side and one contact on the other. Double-pole terminal blocks are slightly more complex, and are used when two separate circuits need to be connected. They consist of two pairs of contacts on each side, connected by two independent contacts on each side. Multi-pole terminal blocks are the most complex type, and are used when multiple circuits need to be connected. These types of blocks will vary in number of contacts, depending on the specific application.

Application Field and Working Principle of Terminal Blocks-Wire to Board

Terminal Blocks-Wire to Board can be found in a variety of applications, from industrial and commercial applications, to consumer electronics. These connector blocks are widely used in automation systems, panel building, and PLC-based applications. The basic working principle is to provide an efficient and secure method of connecting circuits through the provision of a connection point. Terminal blocks are also used to connect multiple PCBs in industrial or consumer products. This connection is generally made through a backplane, which is a series of horizontal and vertical strips of connection points. By connecting multiple PCBs through a backplane, a range of complex circuitry can be achieved.Terminal Blocks-Wire to Board are also used to connect wires to boards in electronics projects. This connection is made through a series of contacts that are placed in certain areas of the board. The contact will connect two or more pieces of wire in the same plane, allowing for efficient delivery of electricity to a variety of electrical components on the board.In large multi-pole terminal blocks, the tip or end of the contact can be bent inwards, thus allowing for the mounting of additional components. The bent-tip provides a secure connection that is resistant to environmental elements such as dust and moisture. This type of terminal block is also used to reduce the distance between connections, as well as to improve contact pressure and maintain a secure connection.

Conclusion

Terminal blocks are essential for connecting and wiring devices together on boards and other circuits. Their ability to interconnect multiple circuits and devices securely and efficiently, makes them invaluable in a wide variety of applications. Their sizes, features, and type of connections available make them suitable for a range of electrical projects.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description