1635160000 Allicdata Electronics
Allicdata Part #:

1635160000-ND

Manufacturer Part#:

1635160000

Price: $ 1.77
Product Category:

Connectors, Interconnects

Manufacturer: Weidmuller
Short Description: LP2N 5.00/04/90 3.2SN OR
More Detail: 2 Position Wire to Board Terminal Block Horizontal...
DataSheet: 1635160000 datasheet1635160000 Datasheet/PDF
Quantity: 1000
50 +: $ 1.60663
Stock 1000Can Ship Immediately
$ 1.77
Specifications
Mounting Type: Through Hole
Screw Thread: M3
Torque - Screw: 0.5-0.6 Nm (4.4-5.3 Lb-In)
Screw Material - Plating: --
Clamp Material - Plating: --
Contact Material - Plating: Copper Alloy - Tin Plated
Housing Material: Polyamide (PA), Nylon
Operating Temperature: -50°C ~ 100°C
Color: Orange
Features: Interlocking (Side)
Wire Termination: Screw - Clamping Yoke, Tension Sleeve
Series: Omnimate LP
Wire Gauge: 12-26 AWG
Voltage: 300V
Current: 20A
Mating Orientation: Horizontal with Board
Pitch: 0.197" (5.00mm)
Positions Per Level: 2
Number of Levels: 2
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks, commonly referred to as wire to board, are components used to conveniently route electrical signals in an orderly and efficient fashion. Terminal blocks are primarily used in more complex installations where a large number of connections between components are simultaneously routed. This can be in the form of a power or ground connection, audio or trigger signal, or communication bus between components. The term ‘wire-to-board’ does not specify a design but represents a broad range of terminal blocks that exist in the market. The differences depend on voltage and current rating, size, material, design of the terminals, type of terminals, and type of contact surfaces. It also depends on what type of product it is used in. Typically, "wire-to-board" products include crimpable versions for hand wiring, soldering versions for printed circuit boards, low-profile versions, terminal blocks with ferrules or male or female pins, and many more. Other than that, some other new emerging designs are those that can be connected via secure screw terminals, as well as those that enable them to be wire wired directly with no special tools or soldering.The properties of each connector, or terminal block, allow for individual types of products to be used in the most appropriate applications. For example, PCB mountable terminal blocks are typically used to connect wires to printed circuit boards, and shuttered systems that disconnect power in the event of accidental contact with live circuits. It is important to choose a terminal block design that fits the environment in which it may be operating.Terminal blocks can provide superior strain relief to connection points, especially when used in harsh environments, and are more robust than some other types of connection. Another advantageous property is their compact size, which is far smaller than other connection systems, as well as the ability to easily make repeatable connections without the use of specialized tools.The purpose of terminal blocks is to provide an electrical and mechanical connection between circuits. Generally, they will consist of a metal or plastic enclosure with slots for the insertion of wires. Each slot will have an electrically conductive element, such as a screw or a push fit, that will clamp onto the wire, making a connection. The conductive elements are usually made of either copper or silver-plated brass and provide a secure connection. Terminal blocks come in both screwless and standard screw designs. The screwless design works by using a two-piece terminal block connected by a sprung clip that compresses onto the wire. This provides a very secure connection without the need for further tightening. The standard screw type uses a single screw with the thread through the wire. As the screw is tightened, the wire is held securely in place.In conclusion, terminal blocks are essential components in the electrical engineering field. As its name suggests, these blocks connect wires to boards to facilitate and organize a efficient installation process. This is especially pertinent for more complex installations, such as those with large amounts of simultaneous connections. It is important to choose the right type of terminal block for the application as each type depends on a range of factors including voltage, current rating, size, tools, material, and type of contact surfaces. Lastly, these connections are secured by either screwless or screw designs, both of which provide secure connections.

The specific data is subject to PDF, and the above content is for reference

Related Products
Search Part number : "1635" Included word is 40
Part Number Manufacturer Price Quantity Description
CVCO55BE-1520-1635 Crystek Corp... 12.26 $ 1000 OSC VCO 1520-1635MHZ SMD ...
1635120000 Weidmuller 13.21 $ 1000 JUMPER 24A 8MM 50POS BLAC...
DK-621-1635-2SCS324 TE Connectiv... 122.32 $ 1000 DK-621-1635-2SCS324Triaxi...
SP-1635 Soberton Inc... 2.21 $ 573 SPEAKER 8OHM 500MW TOP PO...
1635-440-SS RAF Electron... 2.62 $ 465 ROUND STANDOFF #4-40 SS 3...
61083-163522LF Amphenol FCI 0.0 $ 1000 CONN HEADER 160POS .8MM D...
1635 BK001 Alpha Wire 450.93 $ 1000 HOOK-UP STRND 20AWG BLACK...
1635 RD001 Alpha Wire 450.93 $ 1000 HOOK-UP STRND 20AWG RED 1...
1635 BK002 Alpha Wire 321.27 $ 1000 HOOK-UP STRND 20AWG BLACK...
1635 RD002 Alpha Wire 321.27 $ 1000 HOOK-UP STRND 20AWG RED 5...
1635510000 Weidmuller 0.55 $ 1000 TERM BLOCK HDR 3POS 5.08M...
1635560000 Weidmuller 1.3 $ 1000 TERM BLOCK HDR 8POS 5.08M...
1635500000 Weidmuller 0.37 $ 1000 TERM BLOCK HDR 2POS 5.08M...
1635010000 Weidmuller 18.36 $ 1000 TERMINAL MARKER WS 10/5 M...
1635170000 Weidmuller 0.0 $ 1000 CONN TERM BLOCK PCB 5.0MM...
1635160000 Weidmuller 1.77 $ 1000 LP2N 5.00/04/90 3.2SN OR2...
1635140000 Weidmuller 1.77 $ 1000 LP2N 5.08/04/90 3.2SN OR2...
1635820000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 10POS BLA...
1635830000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 11POS BLA...
1635850000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 13POS BLA...
1635860000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 14POS BLA...
1635870000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 15POS BLA...
1635880000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 16POS BLA...
1635770000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 5POS BLAC...
1635790000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 7POS BLAC...
1635810000 Weidmuller 0.0 $ 1000 TERM BLK HEADER 9POS BLAC...
163557-2 TE Connectiv... 0.19 $ 4219 CONN SKT 18-22 AWG TIN CR...
163558-2 TE Connectiv... 0.23 $ 4929 PIN M-N-LPin Contact Tin ...
XG5M-1635-N Omron Electr... 2.38 $ 1000 CONN IDC SOCKET 16POS AWG...
163554-6 TE Connectiv... 0.08 $ 1000 MATENLOK SOCKETSocket Con...
163555-6 TE Connectiv... 0.11 $ 1000 MATENLOK PINPin Contact T...
163557-4 TE Connectiv... 0.06 $ 1000 SOCKET M-N-LSocket Contac...
163554-2 TE Connectiv... 0.07 $ 1000 MATE-N-LOK SOCKETSocket C...
163555-8 TE Connectiv... 0.09 $ 1000 MATE-N-LOK PIN 0,3-Pin Co...
10069525-163502LF Amphenol FCI 1.57 $ 1000 CONN PLUG 160POS 0.8MM SM...
1635000000 Weidmuller 59.0 $ 1000 TAG MARKER 10X5MM WHT 720...
1635150000 Weidmuller 3.06 $ 70 CONN TERM BLOCK PCB 5.08M...
61082-163522LF Amphenol FCI 3.67 $ 1000 CONN RECEPT 160POS .8MM D...
163558-4 TE Connectiv... 0.22 $ 1000 PIN M-N-LPin Contact Tin ...
1635520000 Weidmuller 0.0 $ 1000 TERM BLOCK HDR 4POS 5.08M...
Latest Products
OSTKQ196200

TERM BLOCK RISING CLAMP 19POS19 Position...

OSTKQ196200 Allicdata Electronics
2-1776493-3

TERMINAL BLOCK 23POS 5.08MM SIDE23 Posit...

2-1776493-3 Allicdata Electronics
1776267-4

TERMINAL BLK 4POS 5MM VERT GRN4 Position...

1776267-4 Allicdata Electronics
1-284094-9

TERM BLOCK RCPT WIRE 19POS R/A19 Positio...

1-284094-9 Allicdata Electronics
282860-2

TERM BLOCK RCPT 2POS VERT 7.5MM2 Positio...

282860-2 Allicdata Electronics
2-1546227-5

TERM BLOCK RCPT 25POS VERT 3.5MM25 Posit...

2-1546227-5 Allicdata Electronics