168684J50F-F Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are a type of capacitor that uses a film as the dielectric. They are constructed by securing two conductors in a thin metallic film, with a dielectric material between the conductors. Typically the film capacitors contain several layers of thin metallic films such as a metallized polypropylene, Polyester, or Kapton, with appropriate epoxy coatings to insulate the metal from the environment. The 168684J50F-F is one such type of film capacitor.

The 168684J50F-F is a through-hole high-voltage film capacitor designed for applications in high-frequency DC to AC conversion where the capacitor must withstand high voltage loads. This capacitor has a maximum operating voltage of 200V, and is capable of handling up to 1000V without damage or degradation. It has a very low ESR (equivalent series resistance) of only 2.75 ohm, and a low-noise design that dissipates heat quickly.

The working principle of film capacitors follows a relatively simple concept: when a voltage is applied to the capacitor, electrons (charged particles) are collected on the surface of the film. When the voltage is removed, the electrons are released, allowing the capacitor to discharge. This process creates an electric current between the two terminals, which is collected and stored in the form of energy.

The 168684J50F-F capacitor has a number of advantages over other types of capacitors, such as ceramic or electrolytic. Firstly, because the capacitance does not vary significantly with temperature or voltage, the 168684J50F-F is well suited for applications in which precise capacitance is essential. Additionally, because the dielectric material in this capacitor is a film as opposed to a liquid, it is much lighter in weight, making it easier to transport and integrate into products.

The 168684J50F-F is ideal for high voltage DC to AC conversion, such as in applications involving wind turbine energy generation. It is also well suited for applications in medical imaging, SCADA systems, power inverting, and other high voltage applications. The greater capacitance of the 168684J50F-F compared to other film capacitors makes it ideal for pulse and surge current applications.

In conclusion, the 168684J50F-F is a film capacitor designed for high-voltage applications, offering precise capacitance with low ESR and noiseless operations. It is well suited for DC to AC conversion, pulse and surge current applications, medical imaging, power inverting, and other high voltage applications. Of all the capacitors available, the 168684J50F-F is a great choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference