168824J50G-F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film capacitors are capacitors which use film as the dielectric material. 168824J50G-F is a film capacitor designed for circuit applications. It is a bi-polar capacitor with a voltage rating of 5KVAC and a temperature rating of -40°C to +85°C.

The 168824J50G-F film capacitor has a maximum capacitance of 5uF, with a tolerance of +20%/-20%. It also has a resistance of 0.03 ohms and a dielectric strength of 7VAC. It is a non-inductive capacitor with an inductance of less than 1uH. The capacitor has a surge current rating of 400AAC for 10 seconds and a maximum partial-discharge current of 0.5mA.

The 168824J50G-F film capacitor is designed for use in high-frequency applications. It can be used as an AC filter, a power line conditioning capacitor, and an EMI filter. It can also be used in high-voltage applications for motor control, line filtering, inverter protection, and over-voltage protection. The capacitor\'s low resistance and low parasitic inductance make it suitable for high-frequency applications that require high-speed switching and wide-bandwidth operation.

The 168824J50G-F film capacitor works by storing energy in the form of an electrical potential between two electrodes. The film material acts as a dielectric, which creates an electrical field between the two electrodes, which allows current to flow through the capacitor. This electrical field allows the capacitor to store energy, which is released when the voltage across the terminals of the capacitor drops. When the voltage across the terminals of the capacitor rises, the energy stored in the capacitor is absorbed, and the current is allowed to flow through the capacitor.

The 168824J50G-F film capacitor is a high-performance capacitor designed for high-frequency applications. It has a wide frequency range, low ESR, and a high surge current rating, making it suitable for a wide variety of applications. By using a film material as the dielectric in the capacitor, it provides a reliable, high performance, and low cost solution for circuit applications.

The specific data is subject to PDF, and the above content is for reference